Tooltos Jewelry Casting Burnout Furnace: Step-by-Step Guide for Shopify Shoppers

If you’ve just clicked “Confirm Order” on your Tooltos burnout furnace—or you’re deciding which model to add to your Shopify cart—you’re in the right place. As an independent jewelry business owner, you need two things:

1. Clear, actionable instructions (no confusing jargon).

2. Peace of mind (knowing support is always available).

This guide delivers both. We’ll walk you through setup, control panel basics, programming cycles, and how to get the best results with your Tooltos burnout furnace.

---

1. Which Tooltos Burnout Furnace Do You Have? (Shopify Quick Reference)

Each model is designed with different users in mind:

• 🔧 Segmented Temperature Controlled Furnace (View Product)

  • Up to 30 programmable steps

  • Ideal for advanced jewelers, complex molds, or multi-metal projects

• 🎯 Dual Temperature Controller Furnace (View Product)

  • Simple 2-step programming

  • Perfect for beginners and everyday use

💡 Pro tip: Not sure which one fits your needs? Use our “Chat with Us” button—we’ll help you choose based on what metals you cast.

---

2. Step 1: Unbox & Prep (Shopify Post-Delivery Checklist)

1. Unbox & inspect:

   • Check for shipping damage. (All Shopify orders include insurance. Report issues within 48h via support@tooltos.com.)

   • Inside: Furnace, power cord, user manual, maintenance toolkit.

2. Pick a safe spot:

   • Place on a stable, heat-resistant surface (ceramic or metal—not wood).

   • Ensure a well-ventilated area (wax fumes need to escape).

   👉 Accessories:

   • Tooltos Heat-Resistant Mat (protect your workspace).

   • Tooltos Fume Extractor (Shopify add-on for small workshops).

3. Power up: Plug into a grounded outlet (avoid extension cords). Flip the switch—the CNC display should light up.

[Image: Tooltos burnout furnace on workbench with mat + fume extractor]

---

3. Step 2: Master the Control Panel (No More Button Panic!)

Here’s your Control Panel Cheat Sheet:

📱 Quick hack: Save this table to your phone so you don’t need to flip through manuals mid-project.

---

4. Step 3: Program Your Furnace

🎯 Dual Temperature Controller (Beginner-Friendly)

1. Press ⬅ once → enter SP1.

2. Set first temperature (e.g., 200 °C), press SET.

3. Enter hold time (e.g., 60 min), press SET.

4. Repeat for SP2/T2 (e.g., 750 °C for 120 min).

5. Hold SET + ⬅ → program starts automatically.

🛠️ Segmented Model (Advanced)

1. Press ⬅ to enter SP mode.

2. Step 1: Set temp (150 °C) → press SET → time (30 min).

3. Step 2: Temp (350 °C) → press SET → time (45 min).

4. Add more steps (up to 30).

5. Hold SET + ⬅ → display shows “RUN”.

---

5. Step 4: Mid-Operation Tweaks (FAQ for Shopify Shoppers)

• ❓ Wrong temp set? → Press SET, adjust with ⬆/⬇, hold SET + ⬅ to resume.

• ❓ Display stuck on HOLD? → Check the chamber door. If issue persists, contact support@tooltos.com (Shopify orders include 1-year warranty).

---

6. Step 5: Post-Cycle – Remove Molds & Cool Down

• Wear Tooltos Heat-Resistant Gloves.

• Use tongs to remove the mold (chamber is still 700 °C+).

• Let furnace cool below 50 °C (2–3 hrs) before cleaning with a dry cloth.

---

7. Example Burnout Cycle (Silver Jewelry)