Tooltos Multi-Function Jade Jewelry Table Saw | 480W, Flexible Shaft

Key Selling Points

• 480W motor at 10,000RPM delivers the power needed for cutting, grinding, and polishing jade, gemstones, metal, and wood in a single machine
• 100cm (39.4 in) removable flexible shaft with 0.3-4mm handpiece extends reach for carving and polishing work away from the main table
• Adjustable angle scale and angle ruler allow precise bevel and miter cuts for stone and jade shaping
• Threaded arbor accepts interchangeable accessories — saw blades, sanding wheels, fiber wheels, and polishing wheels — without additional adapters
• Anti-slip base with blade guard and dust shield for stable, safer operation during extended cutting and grinding sessions
• User-replaceable carbon brushes extend motor life — two backup brushes included, accessible by unscrewing the carbon brush cover

About This Table Saw

The Tooltos Multi-Function Jade Jewelry Table Saw is a 480W bench-top machine designed for jewelers, lapidary artists, and jade carvers who need a versatile cutting and finishing station for gemstones, jade, metal, and wood. Unlike single-purpose saws, this machine combines a table saw with a flexible shaft grinder in one unit — use the saw table for straight cuts and slicing, then switch to the flexible shaft handpiece for carving, polishing, and detail grinding without changing machines.

The 10,000RPM motor provides consistent power across the full range of accessories, and the adjustable angle scale makes it practical for bevel cuts and angled shaping work on stone and jade. The included plastic water tank supports wet cutting for stone and jade, which reduces dust and extends blade life. If you need a smaller, lighter saw for non-ferrous metal and non-metallic materials on a 110V supply, see the Tooltos Miniature Jewelry Table Saw.

Best For / Not For

Technical Specifications

Pro Tips

• Always use the water tank when cutting jade and stone — wet cutting controls dust, reduces heat buildup at the blade, and significantly extends blade life compared to dry cutting.
• Use the angle ruler and adjustable scale to set your cut angle before starting — small angular errors in stone and jade are difficult to correct after the cut is made.
• Feed material slowly and steadily into the blade — forcing the cut on hard stone can cause blade deflection and uneven cuts or chipping at the exit edge.
• Replace carbon brushes when you notice reduced power or inconsistent speed — two backup brushes are included and replacement requires only a screwdriver to access the brush cover.
• Use the flexible shaft handpiece for finishing and polishing after cutting — switching between the saw table and the handpiece without changing machines saves significant setup time.

Frequently Asked Questions

Is this machine available in 110V?
No. This machine operates on 220V / 50Hz only. There is no 110V version. If you are in North America or another 110V region, you will need a step-up transformer. For a 110V table saw, see the Tooltos Miniature Jewelry Table Saw.

Do I need to use water when cutting jade and stone?
Wet cutting is strongly recommended for jade and stone. The included plastic water tank is designed for this purpose. Dry cutting of hard stone generates significant heat and dust, which shortens blade life and creates a health hazard from fine silica particles.

What is the flexible shaft used for?
The 100cm flexible shaft connects to the machine and accepts a 0.3-4mm handpiece for carving, grinding, and polishing work. It extends the machine's capability beyond the saw table, allowing you to work on curved surfaces and detailed areas that cannot be fed through the blade.

Can this machine cut ferrous metals or hardened steel?
No. This machine is designed for jade, gemstones, non-ferrous metals (gold, silver, brass, copper, aluminum), wood, and similar craft materials. It is not rated for hardened steel, stainless steel, or ferrous metals.

How do I replace the carbon brushes?
Unscrew the carbon brush cover with a standard screwdriver to access the brushes. Two backup brushes are included in the kit. Replace when you notice reduced motor power or inconsistent speed. No professional servicing is required.

What if I have questions after receiving the machine?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with blade selection, accessory compatibility, and setup questions.

What's Included

• 1 x Multi-function table saw machine
• 1 x 100cm rubber flexible shaft
• 1 x 0.3-4mm working handpiece
• 1 x 0.6-6mm chuck group
• 2 x Saw blades
• 1 x Saw blade connecting shaft
• 1 x Fiber wheel
• 2 x Polishing connecting rods
• 2 x Pressing plates
• 1 x Angle ruler for cutting
• 1 x Angle ruler connection shaft
• 1 x Shield connecting shaft
• 1 x Saw blade fastener
• 1 x Protective cover
• 1 x Plastic water tank
• 2 x Backup carbon brushes
• 2 x Hexagon wrenches
• 2 x Chuck keys
• 2 x Wrenches
• 1 x User manual

Support

Questions about blade selection, voltage requirements, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.