Tooltos 3-in-1 Manual Jewelry Rolling Mill | 120mm Rollers Flat Wire Semi-Circle 0.1-19mm
- 99 in stock
Description
- 3-in-1 Flat, Wire and Semi-Circle Rolling — Press flat sheet metal (1–46mm width), form semi-circle wire (2–8mm) and square wire (1.5–6mm) in one machine with interchangeable roller functions.
- 0.1–19mm Press Thickness Range — Wide thickness range covers everything from heavy stock reduction to fine sheet metal work.
- 3:1 Gear Ratio — Four handle turns per one roller turn, significantly reducing the physical effort required for each rolling pass.
- 120mm Stainless Alloy Rollers — Wide roller surface for consistent, even pressure across the full sheet width.
- Heavy-Duty Construction — 18.5kg stainless alloy frame with bench mounting holes for stable, fixed installation.
The Tooltos 3-in-1 Manual Jewelry Rolling Mill is built for jewelers and metalworkers who need flat sheet reduction, wire forming, and semi-circle profiling in a single machine. The 3:1 gear ratio reduces handle effort substantially compared to direct-drive mills, while the 120mm stainless alloy rollers deliver consistent, even pressure across the full working width.
Best For / Not For
| Best For | Not For |
|---|---|
| Sheet metal reduction for rings, pendants, bracelets Round, semi-circle and square wire forming Texture transfer to sheet metal Individual jewelers and small studios Cold rolling gold, silver, copper, brass, bronze, aluminum |
Steel or hard alloys (will damage rollers) High-volume production (choose electric rolling mill) Single-pass heavy reduction (always reduce gradually) Hot rolling applications |
3-in-1 vs 2-in-1 Manual Rolling Mill
| Feature | 3-in-1 (this model) | 2-in-1 Model |
|---|---|---|
| Flat Sheet Rolling | Yes (1–46mm width) | Yes |
| Wire Groove Profiles | Round + Semi-circle + Square | Round + Semi-circle |
| Gear Ratio | 3:1 | 1:2.5 |
| Max Thickness | 19mm | 7mm |
| Roller Length | 120mm | Standard |
Technical Specifications
| Roller Axis Length | 120mm |
| Shaft Diameter | 60mm |
| Press Sheet Width | 1–46mm |
| Press Thickness Range | 0.1–19mm |
| Semi-Circle Wire Sizes | 2 / 3 / 4 / 5 / 6 / 8mm |
| Square Wire Sizes | 1.5 / 2.5 / 3 / 3.5 / 4 / 5 / 6mm |
| Gear Ratio | 3:1 reduction |
| Roller Material | Stainless Alloy |
| Machine Weight | 18.5kg / 40.8lb |
| Package Dimensions | 455 x 225 x 390mm |
| Operation | Manual (hand-operated, no power required) |
| Suitable Metals | Gold, silver, copper, brass, bronze, aluminum and other non-ferrous metals |
Workshop Applications
| Application | Description |
|---|---|
| Sheet Metal Reduction | Reduce gold, silver or copper sheet to precise gauge for rings, pendants and earrings |
| Wire Forming | Form semi-circle and square wire profiles in multiple sizes for jewelry components |
| Texture Transfer | Roll textures, patterns and mesh impressions into sheet metal surfaces |
| Metal Work Hardening | Work-harden annealed metal through repeated rolling passes |
| Component Fabrication | Form strips and profiles for complex jewelry assemblies and prototyping |
Quick Start Guide
- Mount — Secure the rolling mill to your workbench using the mounting holes and included fasteners.
- Adjust — Set the roller gap using the thickness adjustment handle for your desired starting gauge.
- Insert — Feed the metal sheet or wire between the rollers.
- Roll — Turn the handle smoothly. The 3:1 gear ratio reduces effort significantly.
- Repeat — Make multiple passes, reducing thickness gradually by 10–20% per pass for best results.
Pro Tips
- Anneal metal between passes when reducing thickness significantly to prevent cracking.
- Reduce by 10–20% per pass — gradual reduction produces better surface quality and extends roller life.
- Keep rollers clean with a soft cloth after each use to prevent surface marks on your metal.
- Apply light machine oil to gears monthly for smooth, consistent operation.
- Place texture plates or mesh between the metal and rollers to imprint patterns onto sheet metal.
Frequently Asked Questions
What metals can I use with this rolling mill?
Gold, silver, copper, brass, bronze, aluminum and other non-ferrous metals. Not recommended for steel or hard alloys — these will damage the rollers.
How much can I reduce thickness in one pass?
For best results, reduce by 10–20% per pass. Multiple gradual passes produce better surface quality than one aggressive reduction.
Do I need to anneal metal between passes?
Yes, for significant thickness reductions. Annealing prevents work hardening and cracking, especially with precious metals.
Can I use this for texture transfer?
Yes. Place texture plates, fabric or mesh between the metal and rollers to imprint patterns onto the surface.
What is the difference between this and the 2-in-1 model?
This 3-in-1 model adds square wire groove profiles, has a higher 3:1 gear ratio, wider 120mm rollers, and handles up to 19mm starting thickness. The 2-in-1 model covers flat and round/semi-circle wire at a lower price point.
Does it need to be bolted to a bench?
Yes, strongly recommended. The machine has pre-drilled mounting holes. Securing it to a solid workbench prevents movement during rolling and improves accuracy and safety.
Is this a manual or electric machine?
This is a hand-operated manual rolling mill requiring no power supply. For high-volume or frequent use, see the Tooltos electric rolling mill range.
What's Included
- 1 x Tooltos 3-in-1 Manual Jewelry Rolling Mill Machine
- 1 x Upper/Lower Thickness Adjustment Handle
- 1 x Round Washers
- 1 x Small Shims
- 1 x Ergonomic Handgrip
- 1 x Fastener Set
- 1 x Mounting Screw
Support
For technical questions or order support, contact the Tooltos team at sales@tooltos.com. We typically respond within 24 hours.
