Tooltos Double Valve Jewelry Sandblaster | Wet and Dry, Antique Gold Silver Finish
- 98 in stock
Description
Key Selling Points
- Double valve design allows independent control of two blast streams — work on two areas simultaneously or switch between different blast pressures without stopping
- Wet and dry sandblasting in one machine — dry blasting for matte frosted finishes, wet blasting for finer surface texture and reduced dust during antique gold and silver treatments
- Water cooling system prevents overheating during extended blasting sessions — protects both the machine and the workpiece from heat damage
- 8W built-in lighting illuminates the work area inside the cabinet — see the surface clearly during blasting without external lighting
- Enclosed cabinet design (420 x 360 x 530mm) contains blast media and debris — keeps the workspace clean and allows media recovery for reuse
- Manual sandblasting operation gives direct control over blast direction, duration, and coverage for precise surface treatment on individual pieces
About This Sandblaster
Antique gold and silver finishes — the frosted, matte surface texture that gives jewelry an aged, handcrafted appearance — require consistent, controlled abrasive treatment across the entire piece. Hand polishing with abrasive compounds produces uneven results: high spots get more treatment than recessed areas, and it is difficult to achieve the same surface texture across multiple pieces in a batch. Chemical treatments can produce the color but not the texture. Sandblasting solves both problems by delivering a uniform stream of abrasive media across the surface at controlled pressure, producing consistent matte texture regardless of the piece geometry.
The Tooltos Double Valve Jewelry Sandblaster is designed specifically for jewelry surface treatment — antique finishing, frosted glass bracelet grinding, surface cleaning, and corrosion removal on both vintage and new pieces. The enclosed cabinet keeps media contained for recovery and reuse, the built-in lighting lets you monitor the surface during blasting, and the water cooling system allows extended sessions without heat buildup. The double valve configuration gives you two independent blast points, which is useful for working on larger pieces or switching between different media types without reconfiguring the machine.
Common Applications
| Application | Blasting Mode | Result |
|---|---|---|
| Antique gold and silver finishing | Dry or wet | Uniform matte frosted surface with aged appearance |
| Frosted glass bracelet grinding | Dry | Consistent frosted texture across the bracelet surface |
| Surface cleaning and restoration | Wet or dry | Removes tarnish, oxidation, and surface contamination |
| Fine surface texturing | Wet | Finer, more uniform texture with reduced dust |
Best For / Not For
| Best For | Not For |
|---|---|
| Jewelry studios producing antique gold and silver finishes on cast or fabricated pieces | 110V power supplies — this machine is 220V only |
| Jewelry repair shops restoring tarnished or oxidized vintage pieces to a clean frosted finish | Blast media not included — sand, glass beads, or other abrasive must be sourced separately |
| Workshops needing wet and dry blasting capability in one machine for different surface texture requirements | Large industrial parts — the cabinet interior is sized for jewelry-scale workpieces |
| Artisans creating personalized frosted glass bracelets and custom surface textures on jewelry | Operation without respiratory protection — always wear appropriate PPE when handling blast media |
Technical Specifications
| Blasting Type | Manual sandblasting, double valve |
| Wet and Dry | Both wet and dry sandblasting supported |
| Lighting | 8W built-in cabinet lighting |
| Cooling System | Water cooling |
| Voltage | 220V only |
| Frequency | 50 / 60Hz |
| Cabinet Dimensions | 420 x 360 x 530mm (16.5 x 14.2 x 20.9 in) |
| Machine Weight | Approx. 7.5kg (16.5 lb) |
Pro Tips
- Test blast pressure and media type on a scrap piece of the same metal before treating the actual workpiece — different metals and alloys respond differently to the same blast parameters.
- Use wet blasting mode for finer, more uniform surface texture on delicate pieces — the water reduces the impact energy of each media particle, producing a smoother matte finish than dry blasting at the same pressure.
- Keep the blast nozzle moving continuously rather than holding it in one spot — stationary blasting concentrates abrasion and creates uneven surface texture.
- Recover and reuse blast media regularly — the enclosed cabinet is designed for media recovery, and reusing media reduces operating costs significantly over time.
- Clean the water cooling system periodically to prevent mineral buildup — hard water deposits in the cooling circuit reduce cooling efficiency and can cause blockages over time.
Frequently Asked Questions
Is blast media included?
No. Blast media (sand, glass beads, aluminum oxide, or other abrasive) is not included and must be sourced separately. The type of media you use determines the surface texture and aggressiveness of the treatment — finer media produces smoother matte finishes, coarser media produces more aggressive texture.
Is this machine available in 110V?
No. This machine is 220V only. It is not compatible with 110V power supplies. Verify your workshop voltage before ordering.
What is the difference between wet and dry sandblasting?
Dry sandblasting propels dry abrasive media at the surface for aggressive material removal and coarser matte texture. Wet sandblasting mixes water with the media, which reduces impact energy and produces a finer, more uniform surface texture with less dust. This machine supports both modes, allowing you to choose based on the finish you want to achieve.
What does the double valve design mean?
The double valve configuration provides two independent blast points that can be operated simultaneously or separately. This allows you to work on two areas of a piece at the same time, or to have two different media types loaded and switch between them without reconfiguring the machine.
What metals and materials can be treated with this machine?
The machine is suitable for gold, silver, brass, copper, and other jewelry metals, as well as glass (frosted bracelet applications). The antique finishing process works on both new pieces and vintage jewelry being restored.
What if I have questions after receiving the machine?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with media selection, blast parameters, and setup questions.
What's Included
- 1 x Double valve jewelry sandblaster (main unit)
Support
Questions about media selection, blast parameters, voltage compatibility, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
