Tooltos Pneumatic Engraving Machine | Dual Handpiece, 60W
- 99 in stock
Description
Key Selling Points
- Dual Handpiece Design — Install two graver handpieces simultaneously and switch between them with the selector knob; no stopping to change bits between tasks.
- 100-4000RPM Foot Pedal Speed Control — Stepless foot pedal throttle keeps both hands free to hold and guide the handpiece for precise engraving.
- Adjustable Air Pressure (0-3 kg/cm2) — Pressure regulator with gauge allows precise depth control from light stippling to deep cutting.
- 110V and 220V Available — Select the correct voltage for North American or international workshop use.
- Wide Material Compatibility — Engraving, stone setting, stippling, matte finishing, and crystal stipple work on metal, stone, jade, and other materials.
- 60W Motor — Consistent power output for sustained professional workshop use.
About This Engraving Machine
The Tooltos Dual Handpiece Pneumatic Engraving Machine is designed for jewelers, stone setters, and engravers who need precise, controlled impact engraving without frequent bit changes. Two graver handpieces install simultaneously and switch via the selector knob, keeping workflow uninterrupted. The foot pedal provides stepless speed control from 100 to 4000RPM, while the adjustable air pressure regulator allows precise depth control for engraving, stone setting, stippling, and matte finishing on metal, stone, jade, and other materials.
Available in 110V for North America and 220V for international use. An external air compressor is required and is not included.
Best For / Not For
| Best For | Not For |
|---|---|
| Jewelry engraving on metal, stone, and jade | Use without an external air compressor |
| Stone setting (bezel, pave, channel) | High-volume industrial engraving |
| Stippling and matte finishing | Rotary-only engraving applications |
| Workflows requiring two graver bits ready simultaneously | Engravers who only need a single handpiece setup |
Technical Specifications
| Voltage | 110V / 220V, 50-60Hz (select at order) |
| Power | 60W |
| Speed Range | 100-4000 RPM (foot pedal stepless control) |
| Air Pressure Range | 0-3 kg/cm2 (adjustable with regulator and gauge) |
| Handpieces | 2 (dual handpiece, selector knob switching) |
| Dimensions | 260 x 205 x 160 mm (10.2 x 8.1 x 6.3 in) |
| Weight | 8 kg (17.6 lb) |
| Compatible Materials | Gold, silver, copper, brass, stone, jade, crystal |
| Air Compressor | Required — not included |
Pro Tips
- Always verify the selector knob position before pressing the foot pedal to confirm which handpiece is active.
- Start with lower air pressure and increase gradually — lower pressure for delicate engraving and stone setting, higher pressure for harder materials.
- Use the dual handpiece setup strategically — keep one bit for cutting and one for finishing so you can switch instantly without stopping work.
- Check all air line connections before starting — air leaks cause inconsistent impact and pressure loss during engraving.
- Monitor the pressure gauge throughout a session to maintain consistent engraving depth across the entire workpiece.
Frequently Asked Questions
Does this machine require an air compressor?
Yes. An external air compressor is required for operation and is not included. A compressor capable of delivering at least 3 kg/cm2 (approx. 43 PSI) is recommended.
What is the advantage of the dual handpiece design?
Two graver handpieces can be installed simultaneously. Switch between them using the selector knob without stopping to change bits — ideal for workflows requiring multiple graver types in sequence.
Which voltage should I order?
Select 110V for North America (US, Canada, Mexico). Select 220V for Europe, Asia, Australia, and most other international locations. Ordering the wrong voltage will damage the machine.
Can this machine be used for stone setting?
Yes. The precise impact control and adjustable pressure make it well-suited for bezel, pave, and channel stone setting work.
Are graver bits included?
No. Graver bits and handpiece accessories must be purchased separately. Contact sales@tooltos.com for compatible accessory recommendations.
How do I contact Tooltos if I have a question about my order?
Email the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
What's Included
- 1 x Tooltos Dual Handpiece Pneumatic Engraving Machine (main unit)
- 2 x Pneumatic graver handpieces
- 1 x Connecting pipe
- 1 x Foot pedal
- 2 x Hex key
- 2 x Spring
- 1 x Power cord
- 1 x English user manual
Support
Questions about compressor requirements, voltage selection, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
