Tooltos 3L Jewelry Steam Cleaner | 2200W, Handheld Gun, 4 Bar

Key Selling Points

• 1200mm (47.2 in) Teflon handheld steam gun reaches inside ring shanks, chain links, prong settings, and other areas that a fixed nozzle cannot access
• 2200W heating element maintains stable 4 bar (58 PSI) steam pressure throughout the cleaning session — consistent pressure means consistent results across every piece
• 135C (275F) steam temperature dissolves oils, polishing compounds, skin residue, and investment material without chemical solvents
• 3L capacity cleans up to 100 pieces per fill — suitable for full-day production in a professional jewelry studio or repair shop
• 304 stainless steel tank and body resists corrosion and steam pressure over years of daily professional use
• Double security switches, ground wire, insulated handle, and anti-static protection for safe operation in a professional workshop environment

About This Steam Cleaner

Fixed-nozzle steam cleaners work well for flat surfaces and open settings, but jewelry is rarely flat or open. Ring shanks, pave settings, chain links, and the underside of prong-set stones all have recesses that a stationary nozzle cannot reach at the right angle. The result is a piece that looks clean from the front but still carries residue in the areas that matter most — the places where oils and polishing compound accumulate and dull the metal over time.

The Tooltos 3L Jewelry Steam Cleaner addresses this with a 1200mm (47.2 in) handheld steam gun on a flexible Teflon hose. You hold the gun and direct the steam precisely where it needs to go — into the shank of a ring, along the back of a chain, under the girdle of a set stone — while the piece stays in your other hand or in a holding fixture. The 2200W heating element maintains 4 bar (58 PSI) pressure throughout the session, so the steam force does not drop as the tank depletes.

The 3L stainless steel tank supports up to 100 pieces per fill, making it practical for full-day use in a busy studio or repair shop without repeated refilling interruptions. Available in 110V and 220V to match your workshop power supply.

Best For / Not For

Technical Specifications

Pro Tips

• Use the included beaker and funnel to measure exactly 2L of purified water before filling — there is no water level indicator on the tank, so measuring before filling is the only way to avoid overfilling.
• Allow the machine to reach full operating pressure before starting to clean — steam pressure at startup is lower than at full operating temperature, and cleaning at partial pressure is less effective.
• Direct the handheld gun at a slight angle to the surface rather than straight on — angled steam lifts and carries debris away from the piece rather than pushing it deeper into recesses.
• Empty the tank completely after each session and leave the lid open to allow the interior to dry — standing water in the tank accelerates mineral buildup even when using purified water.
• Descale the tank monthly with a diluted vinegar solution if you use the machine daily — even purified water contains trace minerals that accumulate over time and reduce heating efficiency.

Frequently Asked Questions

Why does this cleaner use a handheld gun instead of a fixed nozzle?
The 1200mm handheld gun lets you direct steam precisely into ring shanks, chain links, prong settings, and other recessed areas that a fixed nozzle cannot reach at the correct angle. For professional jewelry cleaning, directed steam control produces significantly better results than a fixed spray pattern.

What type of water should I use?
Purified or distilled water only. Tap water contains dissolved minerals that deposit on the heating element during steam generation. Over time, mineral buildup reduces heating efficiency and can damage the element. Using purified water is the single most important maintenance step for long machine life.

How many pieces can I clean per fill?
The 3L tank (filled to the 2L maximum per session) supports cleaning up to approximately 100 pieces before refilling. Actual capacity depends on piece size and how long you steam each item.

Is this safe for all gemstones?
High-temperature steam (135C / 275F) is safe for diamonds, rubies, sapphires, and most hard, untreated stones. It is not safe for heat-sensitive or porous gemstones including emeralds, opals, pearls, turquoise, coral, amber, and fracture-filled or treated stones. When in doubt, do not steam a stone you cannot identify with certainty.

Which voltage should I order — 110V or 220V?
Select the voltage that matches your workshop power supply. North America and most of the Americas use 110V. Europe, Asia, Australia, and most other regions use 220V.

What if I have questions after receiving the machine?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, water type, maintenance, and gemstone safety questions.

What's Included

• 1 x 3L professional jewelry steam cleaner with handheld steam gun
• 1 x Standard exhaust nozzle
• 1 x Long exhaust nozzle
• 1 x Filter hose
• 1 x Water inlet cover
• 1 x Power cable
• 1 x Beaker (measuring cup)
• 1 x Funnel
• 1 x Instruction manual

Support

Questions about water type, gemstone safety, voltage selection, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.