Tooltos 30W Pen Soldering Iron | Switch, Replaceable Tips
- 94 in stock
Description
Key Selling Points
- Mica core heating element provides stable, consistent heat output and longer service life compared to standard ceramic or nichrome heating elements
- On-off switch knob on the handle lets you pause work without unplugging — practical for intermittent soldering tasks on the bench
- Replaceable tips in 0-4mm range allow you to match the tip size to the joint or wax area being worked
- Reaches up to 380C (716F) — sufficient for soft soldering of jewelry findings, electronic components, and wax work
- Insulated handle with coil protection at the end prevents cable stress and breakage at the most common failure point
- Dual voltage (110V and 220V) in a single unit — compatible with power supplies worldwide
About This Soldering Iron
The Tooltos 30W Pen Soldering Iron is a compact, pen-style soldering tool designed for jewelers, electronics technicians, and craftspeople who need a reliable, easy-to-handle iron for soft soldering, wax work, and light repair tasks. The mica core heating element heats up in approximately 2 minutes and maintains stable temperature during use, making it suitable for extended soldering sessions without significant temperature drift.
The built-in on-off switch is a practical feature that is often absent on basic soldering irons — it lets you pause between joints without unplugging the iron, reducing the risk of accidental burns and extending tip life by avoiding unnecessary heat cycles. If you need a dedicated low-temperature wax pen (50-150C / 122-302F) for wax mold repair and carving without reaching soldering temperatures, see the Tooltos Jewelry Electric Wax Welder.
Best For / Not For
| Best For | Not For |
|---|---|
| Jewelers soft-soldering findings, jump rings, and small metal components with low-temperature solder | Delicate wax carving and wax mold repair — this iron reaches 380C (716F) and will damage wax models. Use the Tooltos Wax Welder (50-150C) instead |
| Electronics technicians soldering PCB components, wires, and connectors | High-temperature silver or gold soldering — jewelry hard soldering requires a torch or dedicated high-temperature station above 600C (1112F) |
| DIY craftspeople needing a lightweight, easy-to-use iron for general repair and assembly work | Users who need instant heat — this iron requires approximately 2 minutes to reach working temperature after switching on |
| Wax welding tasks where temperatures above 150C are acceptable (e.g., joining harder wax types) | Professional-grade temperature-controlled soldering — this iron does not have a digital temperature display or precise temperature regulation |
Technical Specifications
| Power | 30W |
| Maximum Temperature | 380C (716F) |
| Heating Mode | External thermal (mica core) |
| Preheat Time | Approx. 2 minutes |
| Tip Range | 0 - 4mm (replaceable) |
| Voltage | 110V / 220V (dual voltage) |
| Frequency | 50 / 60Hz |
| Weight | Approx. 170g (6.0 oz) |
Pro Tips
- Allow the full 2-minute preheat before attempting to solder — applying the iron to a joint before it reaches working temperature results in cold joints that look dull and have poor mechanical strength.
- Tin the tip before first use and after each cleaning — apply a small amount of solder to the clean tip to coat it, which improves heat transfer and prevents oxidation.
- Clean the tip on a damp sponge or brass wire cleaner between joints — oxidized residue on the tip reduces heat transfer and can contaminate the solder joint.
- Use the on-off switch to pause between tasks rather than unplugging — repeated thermal cycling from full cold start shortens the heating element life over time.
- Match the tip size to the joint — a tip that is too large transfers too much heat to surrounding areas, while a tip that is too small takes longer to heat the joint and increases the risk of a cold solder connection.
Frequently Asked Questions
Can I use this iron for wax carving and wax mold repair?
This iron reaches up to 380C (716F), which is far above the temperature range needed for wax work. At this temperature it will melt and damage wax models rather than join them cleanly. For wax-specific work at 50-150C (122-302F), use the Tooltos Jewelry Electric Wax Welder instead.
Does this iron work on both 110V and 220V?
Yes. This is a dual-voltage iron that operates on both 110V and 220V / 50-60Hz. It is compatible with power supplies worldwide without a transformer.
How long does it take to heat up?
The iron reaches working temperature in approximately 2 minutes after switching on. Allow the full preheat time before applying it to a joint for best results.
Can I use this iron for hard soldering gold and silver jewelry?
No. Hard soldering of gold and silver requires temperatures above 600C (1112F) and is typically done with a torch or a dedicated high-temperature soldering station. This 30W iron is suitable for soft soldering (low-temperature solder) and light jewelry repair work only.
Are replacement tips available?
The iron accepts replaceable tips in the 0-4mm range. Contact us at sales@tooltos.com to confirm compatible replacement tip availability for your unit.
What if I have questions after receiving the iron?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with tip selection, soldering technique questions, and troubleshooting.
What's Included
- 1 x 30W pen-type electric soldering iron with on-off switch
Support
Questions about tip compatibility, soldering applications, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
