Tooltos 3-in-1 Centrifugal Polishing Machine | Magnetic Wet Dry | 750W 6L

Three Professional Polishing Modes in One Machine

Most jewelry workshops need multiple polishing machines to handle different finishing tasks — magnetic polishing for fine detail work, wet barrel polishing for bulk finishing, and dry polishing for surface refinement. The Tooltos 3-in-1 Centrifugal Polishing Machine combines all three modes in a single 750W unit with a 6L capacity, giving professional jewelry studios, metal fabrication workshops, and production operations a complete polishing solution without the cost and footprint of three separate machines.

Key Features

• 3-in-1 Polishing Modes — Magnetic, wet centrifugal, and dry centrifugal polishing in one machine, covering the full range of jewelry finishing requirements without switching equipment.
• 750W Motor — High-power motor delivers consistent centrifugal force across all three polishing modes for reliable, repeatable finishing results.
• 6L Barrel Capacity — Large working volume supports batch polishing for production workflows, reducing cycle time and increasing throughput.
• Three Interchangeable Barrels — Dedicated magnetic, wet, and dry barrels included, allowing quick mode switching without cross-contamination between polishing media.
• Built-In Water Circulation System — Integrated drainage pipe, water delivery valve, and air pump support wet polishing operations with controlled water flow management.
• 110V and 220V Available — Both voltage options available to support US and international workshop setups.

Polishing Mode Comparison

Best For

• Professional jewelry studios needing magnetic, wet, and dry polishing in one machine
• Production workshops requiring batch polishing capacity with consistent results
• Metal fabrication operations finishing gold, silver, copper, brass, and stainless steel
• Casting studios needing post-casting surface finishing and deburring
• Workshops looking to consolidate multiple polishing machines into one unit

Not For

• Hobbyist or occasional single-piece polishing — this machine is designed for professional batch production use
• Ferrous metals such as iron or steel — magnetic mode is optimized for non-ferrous jewelry metals

Technical Specifications

Pro Tips

• Start with magnetic mode for intricate pieces with fine details, then follow with wet centrifugal for bulk surface improvement, and finish with dry mode for final brightening.
• Keep dedicated media in each barrel and label them clearly — cross-contamination between magnetic pins and abrasive media will reduce polishing quality.
• For wet mode, use the correct water-to-compound ratio recommended in the manual — too much water dilutes the compound and reduces finishing effectiveness.
• Clean and dry the machine after each wet polishing session to prevent compound buildup and extend the service life of the water circulation components.

Frequently Asked Questions

Can all three polishing modes be used with the same machine?
Yes. The machine comes with three dedicated barrels — magnetic, wet, and dry — that can be swapped to switch between polishing modes without purchasing additional equipment.

What metals can be polished with this machine?
Gold, silver, copper, brass, stainless steel, aluminum, and most non-ferrous metals. The magnetic mode is optimized for non-ferrous jewelry metals.

Is polishing media included?
The machine includes the three barrels and water circulation accessories. Polishing media (magnetic pins, abrasive media, dry polishing compounds) are sold separately.

Which voltage should I choose?
Select 110V for US and Canada. Select 220V for Europe, Asia, Australia, and most other international markets. Please confirm your local voltage before ordering.

Is this machine suitable for small jewelry workshops?
Yes. The 6L capacity and three polishing modes make it suitable for both small professional studios and larger production operations that need flexible finishing capability.

What's Included

• 1 × 3-in-1 Centrifugal Polishing Machine
• 3 × Polishing Barrels (Magnetic / Wet / Dry)
• 1 × Connection Tube
• 1 × Drainage Pipe
• 1 × Sealing Tape
• 1 × Power Cord
• 1 × Air Pump
• 1 × Water Delivery Valve
• 1 × Adapter
• 1 × Valve Connector
• 1 × Instruction Manual

Why Choose Tooltos

Tooltos focuses on professional jewelry tools and workshop machines designed for practical production use. This 3-in-1 centrifugal polishing machine offers magnetic, wet, and dry polishing capability in a single 750W unit — giving jewelry studios and production workshops a complete, space-efficient polishing solution that handles the full range of finishing requirements without multiple machines.

Need Help?

Questions about polishing modes, media compatibility, voltage, or your order? Contact the Tooltos support team at sales@tooltos.com. We typically respond within 24 hours.