Tooltos Modular Jewelry Hammer Set | 6 Interchangeable Heads No-Mar
- 113 in stock
Description
- One Hammer Replaces Six — Save bench space and cost; one handle with six specialized heads covers every jewelry hammering task
- No-Mar Soft Heads — POM and three rubber heads (Shore 80, 85, 90) leave zero marks on polished gold, silver and finished bezels
- M4 Quick-Change Thread — Switch heads in seconds with the included hex wrench; no special tools needed
- Full Hardness Range — Shore 80 (soft) to hard steel; match the head to the task and material
- Protective Storage Case Included — All six heads and the handle stored and organized, ready for bench use
- Suitable for Ring Forming, Bezel Setting and Watch Repair — Covers the most common jewelry bench hammering applications
The Tooltos Modular Jewelry Hammer Set gives jewelers, bench technicians and watch repair professionals a single handle with six interchangeable heads covering the full range of hammering tasks. The M4 quick-change thread makes head swaps fast, and the Shore 80-90 rubber heads and POM head ensure zero surface damage on finished pieces. The protective storage case keeps all components organized and protected between uses.
Head Selection Guide
| Head Type | Material | Hardness | Best For | Surface Impact |
|---|---|---|---|---|
| Iron Flat | Steel | Hard | Metal forming, riveting, heavy shaping | May mark — use on raw unfinished metal only |
| Brass Flat | Brass | Medium-hard | Ring forming, metal flattening, general shaping | Minimal marking on soft metals |
| POM Flat | Engineering plastic | Medium | Delicate adjustment, bezel setting support | No marks on polished surfaces |
| Black Rubber | Rubber | Shore 90 (firm) | Stone setting, controlled tapping | Zero surface damage |
| Orange Rubber | Rubber | Shore 85 (medium) | Ring adjustment, general jewelry work | Zero surface damage |
| Yellow Rubber | Rubber | Shore 80 (soft) | Delicate pieces, watch case work, finishing | Zero surface damage |
Best For / Not For
| Best For | Not Ideal For |
|---|---|
| Ring forming on a mandrel Bezel setting and stone setting Metal flattening and shaping Watch case work (Shore 80 head) Delicate finishing on polished pieces Jewelers, bench technicians and watch repair professionals |
Heavy industrial metalworking Applications requiring a weighted chasing hammer Engraving (use pneumatic engraver instead) Forging thick stock metal |
Technical Specifications
| Handle length | 12 cm (4.7 in) |
| Head connection | M4 threaded quick-change |
| Rubber hardness range | Shore 80 / 85 / 90 |
| Total weight | 0.8 kg (1.7 lb) |
| Package dimensions | 25 x 12 x 5 cm (9.8 x 4.7 x 2.0 in) |
Pro Tips
- Start with a softer head when unsure — you can always switch to a firmer head if more force is needed
- Use the Iron head only on raw, unfinished metal surfaces to avoid permanent marking
- Check head tightness before each session — a loose head reduces accuracy and can damage the workpiece
- For ring forming, use the Brass head for initial shaping and switch to Yellow rubber for final adjustment on the mandrel
- Store rubber heads away from direct sunlight to prevent hardening and extend lifespan
Frequently Asked Questions
Q: Will the rubber heads leave marks on my jewelry?
A: No. The POM and all three rubber heads are designed for no-mar contact — safe on polished gold, silver and finished bezels.
Q: How do I change the heads?
A: Use the included M4 hex wrench to unscrew the current head, thread on the new one and tighten. The swap takes about 10 seconds.
Q: Can I buy replacement rubber heads separately?
A: Yes. Replacement heads are available — contact sales@tooltos.com for current availability.
Q: Is this suitable for watch repair?
A: Yes. The Yellow rubber head (Shore 80) is ideal for delicate watch case work where zero surface marking is critical.
Q: Which head should I use for bezel setting?
A: The POM or Orange rubber head (Shore 85) provides controlled pressure without scratching the bezel or surrounding metal.
Q: Is the handle comfortable for extended use?
A: Yes. The handle has a rubber grip for comfort and control during extended bench sessions.
What's Included
- 1x Hammer handle (steel with rubber grip)
- 1x Iron flat head
- 1x Brass flat head
- 1x POM flat head
- 3x Rubber heads (Black Shore 90, Orange Shore 85, Yellow Shore 80)
- 1x M4 hex wrench
- 1x Protective storage case
Support
Questions about head selection, replacement parts or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
