Tooltos GraverMate Pneumatic Engraver | 80W Foot Pedal
- 97 in stock
Description
Key Selling Points
- Foot pedal control keeps both hands free for precise positioning and steady workpiece handling
- 80W motor delivers consistent 1400RPM drive speed for reliable performance across extended sessions
- Adjustable air pressure (0-3 kg/cm2 / 0-43 PSI) lets you fine-tune impact force for different metals and stone settings
- Compatible with standard GraverMate handpieces — works with your existing tool collection
- Compact desktop footprint fits comfortably on a jeweler's bench without crowding your workspace
- Complete kit includes handpiece, foot pedal, and all necessary connections — ready to engrave out of the box
About This Engraving Machine
The Tooltos GraverMate Pneumatic Engraver is built for jewelers who need consistent, controllable impact engraving without hand fatigue. Powered by an 80W motor and driven by compressed air, it delivers smooth, repeatable strokes that are essential for fine detail work — whether you are engraving lettering, setting stones, or carving decorative patterns.
The foot pedal design is a practical advantage in a professional setting: you control start and stop with your foot, leaving both hands free to guide the handpiece and secure the workpiece. Air pressure is adjustable on the fly, so you can shift from light surface engraving to heavier stone-setting work without stopping to reconfigure the machine.
Best For / Not For
| Best For | Not For |
|---|---|
| Professional jewelers doing daily engraving and stone setting | Laser engraving — this is a pneumatic impact tool, not a laser device |
| Bench jewelers engraving gold, silver, platinum, and brass | Use without an air compressor — a compressor (min. 0.03 m3/min / 1.06 CFM) is required and not included |
| Stone setting work requiring precise, repeatable impact force | Engraving hardened steel or industrial-grade materials beyond jewelry metals |
| Jewelry schools and training workshops needing a reliable entry-to-professional tool | Hobbyists who engrave occasionally — consider a rotary engraver for lighter, less frequent use |
Technical Specifications
| Power | 80W |
| Drive Speed | 1400 RPM |
| Air Pressure Range | 0-3 kg/cm2 (0-43 PSI) |
| Compressor Requirement | Min. 0.03 m3/min (1.06 CFM) — not included |
| Voltage Options | 110V / 220V (select at checkout) |
| Machine Dimensions | Approx. 200 x 120 x 150 mm (7.9 x 4.7 x 5.9 in) |
| Machine Weight | Approx. 2.5 kg (5.5 lb) |
| Handpiece Compatibility | Standard GraverMate handpieces |
Pro Tips
- Start at the lowest air pressure setting and increase gradually — most engraving tasks on gold and silver require less pressure than you expect.
- Use the foot pedal to pulse the machine in short bursts when working near stone edges to avoid chipping or cracking the setting.
- Keep the air line free of moisture by using an inline air filter or dryer — moisture in the line can affect consistent stroke performance over time.
- Secure your workpiece firmly in a ring clamp or engraving block before starting — the foot pedal frees your hands specifically so you can maintain a stable grip throughout.
- Clean the handpiece connection point regularly to prevent air leaks that reduce impact consistency.
Frequently Asked Questions
Does this machine come with an air compressor?
No. An air compressor is required but not included. Your compressor must provide a minimum output of 0.03 m3/min (1.06 CFM). Most standard workshop compressors in this range are compatible.
Which voltage should I choose — 110V or 220V?
Select the voltage that matches your local power supply. North America and most of the Americas use 110V. Europe, Asia, Australia, and most other regions use 220V. If you are unsure, check the outlet specifications in your workshop.
Can I use this machine for laser engraving?
No. This is a pneumatic impact engraver — it uses compressed air to drive a handpiece mechanically. It is not a laser device and cannot perform laser engraving.
What metals can this machine engrave?
The GraverMate is suitable for engraving gold, silver, platinum, brass, and copper — the standard metals used in jewelry making. It is not designed for hardened steel or industrial alloys.
Is this machine suitable for beginners?
It can be used by beginners, but it is designed and optimized for professional bench jewelers. If you are new to engraving, we recommend starting at the lowest pressure setting and practicing on scrap metal before working on finished pieces.
What if I have questions after receiving the machine?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, compatibility questions, and troubleshooting.
What's Included
- 1 x GraverMate pneumatic engraving machine (80W)
- 1 x Foot pedal control
- 1 x Handpiece
- 1 x Air connection hose
- 1 x Power cable (voltage-matched to selected variant)
- User manual
Support
Questions about setup, compressor compatibility, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
