Tooltos Miniature Jewelry Table Saw | 90W, 100mm Blade
- 98 in stock
Description
Key Selling Points
- 90W motor with 5000RPM no-load speed delivers clean, consistent cuts through non-ferrous metals, stone, wood, glass, and plastic
- 100mm (4 in) blade diameter sized for precision cutting of small jewelry components and gemstone rough material
- 190 x 142mm (7.5 x 5.6 in) work table provides a stable, flat surface for guiding small workpieces accurately through the blade
- Compact desktop footprint fits on a standard jeweler's bench without requiring a dedicated machine station
- Suitable for both metallic and non-metallic materials — one tool for cutting metal sheet, stone slabs, wood inlay, and plastic components
- Straightforward setup with minimal assembly — plug in and start cutting without complex calibration
About This Table Saw
The Tooltos Miniature Jewelry Table Saw is a compact bench-top cutting machine designed for jewelers, lapidary artists, and precision craftspeople who need accurate, repeatable cuts in small-scale materials. The 100mm blade and 190 x 142mm work table are sized specifically for jewelry-scale workpieces — metal sheet, stone slabs, wood inlay strips, glass, and plastic — where a full-size table saw would be impractical and difficult to control.
Running at 5000RPM with a 90W motor, it provides enough power for clean cuts through non-ferrous metals and non-metallic materials up to 8mm (0.3 in) deep. The flat work table keeps small pieces stable and square during cutting, reducing the risk of chipping or irregular cuts that are common when using rotary tools freehand.
Best For / Not For
| Best For | Not For |
|---|---|
| Jewelers cutting non-ferrous metal sheet, wire, and small stock pieces to length or shape | Materials thicker than 8mm (0.3 in) — the maximum cutting depth for non-metallic materials and stone is 8mm |
| Lapidary artists slicing stone rough, tile, and mineral specimens at jewelry scale | 220V power supplies — this machine is 110-120V only and requires a transformer for use outside North America |
| Craftspeople cutting wood inlay, glass, and plastic components for jewelry and decorative work | Cutting hardened steel, stainless steel, or ferrous metals — this saw is designed for non-ferrous metals only |
| Workshops needing a compact, dedicated cutting station that does not take up significant bench space | High-volume production cutting — this is a precision bench tool designed for small-batch and detail work |
Technical Specifications
| Motor Power | 90W |
| No-Load Speed | 5,000 RPM |
| Blade Diameter | 100mm (4.0 in) |
| Work Table Size | 190 x 142mm (7.5 x 5.6 in) |
| Max Cutting Depth | 8mm (0.3 in) for non-metallic materials and stone |
| Voltage | 110-120V / 50Hz only |
| Compatible Materials | Non-ferrous metals, stone, wood, glass, plastic |
Pro Tips
- Use a blade appropriate for the material — a diamond blade for stone and glass, a non-ferrous metal blade for gold, silver, and brass. Using the wrong blade type reduces cut quality and shortens blade life.
- Feed the workpiece slowly and steadily into the blade — forcing the cut increases the risk of chipping on stone and glass, and can cause the blade to bind on metal.
- Use a fence or guide when making straight cuts — even small deviations in feed angle are amplified at jewelry scale and affect the fit of cut pieces.
- Keep the work table clean and free of debris between cuts — small chips under the workpiece can cause it to rock and produce uneven cuts.
- Always allow the blade to reach full speed before feeding material — starting a cut before the motor is at speed increases wear on both the blade and the motor.
Frequently Asked Questions
Is this saw available in 220V?
No. This machine operates on 110-120V / 50Hz only. There is no 220V version. If you are in a 220V region (Europe, Asia, Australia, etc.), you will need a step-down transformer to use this machine safely.
What is the maximum cutting depth?
The maximum cutting depth is 8mm (0.3 in) for non-metallic materials and stone. For non-ferrous metals, the practical cutting depth depends on the material hardness and blade type used.
Can this saw cut hardened steel or stainless steel?
No. This saw is designed for non-ferrous metals (gold, silver, brass, copper, aluminum) and non-metallic materials. It is not rated for hardened steel, stainless steel, or ferrous metals.
Does the blade come included?
The package includes the mini table saw and an instruction manual. A blade appropriate for your material type may need to be sourced separately depending on your application. Please check the package contents before ordering if a specific blade type is required.
What size blade does this saw use?
The saw uses a 100mm (4 in) diameter blade. When sourcing replacement or specialty blades, ensure the blade diameter and arbor size match the machine specifications.
What if I have questions after receiving the saw?
Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with blade compatibility, setup, and troubleshooting.
What's Included
- 1 x Miniature jewelry table saw
- 1 x Instruction manual
Support
Questions about blade compatibility, voltage requirements, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
