Jewelry Hammer Set with 6 Interchangeable Heads | Tooltos
- 112 auf Lager
Description
The modular bench hammer for jewelers and watch repair professionals who need one tool for every hammering task — six interchangeable heads from Shore 80 soft rubber to hard steel swap in seconds via M4 thread, covering ring forming, bezel setting and delicate watch case work with zero surface marking on polished pieces.
- One Hammer Replaces Six — Save bench space and cost; one handle with six specialized heads covers every jewelry hammering task
- No-Mar Soft Heads — POM and three rubber heads (Shore 80, 85, 90) leave zero marks on polished gold, silver and finished bezels
- M4 Quick-Change Thread — Switch heads in seconds with the included hex wrench; no special tools needed
- Full Hardness Range — Shore 80 (soft) to hard steel; match the head to the task and material
- Protective Storage Case Included — All six heads and the handle stored and organized, ready for bench use
- Suitable for Ring Forming, Bezel Setting and Watch Repair — Covers the most common jewelry bench hammering applications
The Tooltos Modular Jewelry Hammer Set gives jewelers, bench technicians and watch repair professionals a single handle with six interchangeable heads covering the full range of hammering tasks. The M4 quick-change thread makes head swaps fast, and the Shore 80-90 rubber heads and POM head ensure zero surface damage on finished pieces. The protective storage case keeps all components organized and protected between uses.
Head Selection Guide
| Head Type | Material | Hardness | Best For | Surface Impact |
|---|---|---|---|---|
| Iron Flat | Steel | Hard | Metal forming, riveting, heavy shaping | May mark — use on raw unfinished metal only |
| Brass Flat | Brass | Medium-hard | Ring forming, metal flattening, general shaping | Minimal marking on soft metals |
| POM Flat | Engineering plastic | Medium | Delicate adjustment, bezel setting support | No marks on polished surfaces |
| Black Rubber | Rubber | Shore 90 (firm) | Stone setting, controlled tapping | Zero surface damage |
| Orange Rubber | Rubber | Shore 85 (medium) | Ring adjustment, general jewelry work | Zero surface damage |
| Yellow Rubber | Rubber | Shore 80 (soft) | Delicate pieces, watch case work, finishing | Zero surface damage |
Best For / Not For
| Best For | Not Ideal For |
|---|---|
| Ring forming on a mandrel Bezel setting and stone setting Metal flattening and shaping Watch case work (Shore 80 head) Delicate finishing on polished pieces Jewelers, bench technicians and watch repair professionals |
Heavy industrial metalworking Applications requiring a weighted chasing hammer Engraving (use pneumatic engraver instead) Forging thick stock metal |
Technical Specifications
| Handle length | 12 cm (4.7 in) |
| Head connection | M4 threaded quick-change |
| Rubber hardness range | Shore 80 / 85 / 90 |
| Total weight | 0.8 kg (1.7 lb) |
| Package dimensions | 25 x 12 x 5 cm (9.8 x 4.7 x 2.0 in) |
Pro Tips
- Start with a softer head when unsure — you can always switch to a firmer head if more force is needed
- Use the Iron head only on raw, unfinished metal surfaces to avoid permanent marking
- Check head tightness before each session — a loose head reduces accuracy and can damage the workpiece
- For ring forming, use the Brass head for initial shaping and switch to Yellow rubber for final adjustment on the mandrel
- Store rubber heads away from direct sunlight to prevent hardening and extend lifespan
Frequently Asked Questions
Q: Will the rubber heads leave marks on my jewelry?
A: No. The POM and all three rubber heads are designed for no-mar contact — safe on polished gold, silver and finished bezels.
Q: How do I change the heads?
A: Use the included M4 hex wrench to unscrew the current head, thread on the new one and tighten. The swap takes about 10 seconds.
Q: Can I buy replacement rubber heads separately?
A: Yes. Replacement heads are available — contact sales@tooltos.com for current availability.
Q: Is this suitable for watch repair?
A: Yes. The Yellow rubber head (Shore 80) is ideal for delicate watch case work where zero surface marking is critical.
Q: Which head should I use for bezel setting?
A: The POM or Orange rubber head (Shore 85) provides controlled pressure without scratching the bezel or surrounding metal.
Q: Is the handle comfortable for extended use?
A: Yes. The handle has a rubber grip for comfort and control during extended bench sessions.
What's Included
- 1x Hammer handle (steel with rubber grip)
- 1x Iron flat head
- 1x Brass flat head
- 1x POM flat head
- 3x Rubber heads (Black Shore 90, Orange Shore 85, Yellow Shore 80)
- 1x M4 hex wrench
- 1x Protective storage case
Support
Questions about head selection, replacement parts or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.
