Produktbild 1, kann in einem modal geöffnet werden
Square steel jewelry anvil on a black rubber pad with separate views of both components
Produktbild 2, kann in einem modal geöffnet werden
Jewelry anvil and rubber pad set showing the flat steel surface, support pad, and light metal shaping applications
Produktbild 3, kann in einem modal geöffnet werden
Four steps showing rubber pad placement, steel anvil setup, workpiece positioning, and light hammering
Produktbild 4, kann in einem modal geöffnet werden
Hammer and tweezers shaping a small metal strip on a steel jewelry anvil supported by a rubber pad
Produktbild 5, kann in einem modal geöffnet werden
Two-piece jewelry bench set containing one square steel anvil and one black rubber pad
Produktbild 6, kann in einem modal geöffnet werden
Dimensions and weights of the 40 by 40 by 10 mm steel anvil and 100 by 100 mm rubber pad
Produktbild 7, kann in einem modal geöffnet werden
Material guide showing brass, copper, silver, and gold for light work, with hardened steel and brittle materials excluded

Jewelry Steel Anvil and Rubber Pad Set

  • 139 auf Lager
  • Inventar unterwegs
Regulärer Preis $19.99 USD
Regulärer Preis Verkaufspreis $19.99 USD
Versand wird an der Kasse berechnet.

Description

Product Overview

This jewelry steel anvil and rubber pad set provides a compact working surface for small metal components, manual shaping, and jewelry bench work. The flat steel block sits on the larger rubber pad to create a simple two-piece setup for your workbench.

Keep it within reach for small jewelry fabrication projects and component adjustments. Its space-saving square design suits jewelry workshops, hobby benches, and DIY craft workspaces.

Key Features

Flat Steel Working Surface

The square steel anvil provides a dedicated surface for supporting suitable small metal pieces during controlled hand-tool work.

Separate Rubber Support Pad

The larger rubber pad sits beneath the steel block, providing a supporting base with room around the anvil. Both pieces can be positioned to suit your bench layout.

Compact Manual Setup

Prepare a working area without a powered machine. The two-piece design is straightforward to set up and convenient for detailed work where a small working surface is preferred.

Suitable Applications

  • Jewelry making and small-scale metal fabrication.
  • Controlled manual shaping and adjustment of suitable metal components.
  • Small jewelry projects at hobby benches and craft workshops.

Important Function Clarification

This is a compact manual bench set, not a powered machine or a heavy-duty industrial anvil. The rubber pad supports the steel block; it does not clamp the workpiece or eliminate the need for a stable workbench.

Suitability and results depend on the metal, workpiece dimensions, hand tool, and applied force. Use controlled impacts and avoid work that could damage the steel surface or rubber pad.

Technical Specifications

Components Square steel anvil and square rubber pad
Anvil material Steel
Pad material Rubber
Anvil dimensions 40 × 40 × 10 mm / 1.57 × 1.57 × 0.39 in
Rubber pad dimensions 100 × 100 mm / 3.94 × 3.94 in
Anvil weight Approximately 125 g / 0.28 lb
Rubber pad weight Approximately 350 g / 0.77 lb
Total set weight Approximately 475 g / 1.05 lb
Operation Manual

Package Contents

  • 1 × Square steel anvil
  • 1 × Square rubber pad

Total: 2 pieces. Only the steel anvil and rubber pad are included. Hammers, jewelry components, and other workshop accessories shown in illustrative images are not included.

Basic Operating Steps

  1. Place the rubber pad on a stable, suitable workbench.
  2. Position the steel anvil centrally on the pad and check that the setup is steady.
  3. Place a suitable metal component on the flat steel surface.
  4. Use an appropriate hand tool with controlled force for the intended shaping or adjustment.
  5. Pause regularly to check the position of the block and inspect the workpiece.
  6. Remove the workpiece and inspect the result.

Safety Information

  • Wear appropriate eye protection during metalworking.
  • Keep fingers clear of the striking area and ensure the workpiece is supported before applying force.
  • Avoid excessive impact and stop if the block or pad shifts.
  • Do not use the set for heavy-duty industrial forging or processes that may damage either component.

Frequently Asked Questions

Can this set replace a full-size workshop anvil?

It is intended for small-scale jewelry and manual metalworking tasks. Choose a larger, purpose-built anvil for work requiring heavier impacts or a larger supporting surface.

How should I choose a hand tool for this set?

Match the tool and applied force to the workpiece material and the intended adjustment. Start with controlled, light work and inspect the result frequently rather than increasing force immediately.

What should I do if the steel block moves during use?

Stop work, reposition the block centrally on the rubber pad, and check the stability of the workbench and setup before continuing.

Support

For product questions, compatibility assistance, or order support, contact the Tooltos team at sales@tooltos.com. We respond during business days within 24 hours.