20 Piece Ring Sizing and Adjustment Tool Kit

Product Overview

Bring everyday ring measuring, reshaping, polishing, and fit adjustment into one practical set. This 20 piece kit combines ring sizers, measuring tapes, mandrels, a rubber mallet, a ring clamp, an agate burnisher, polishing tools, and clear ring adjusters for jewelry makers, repair benches, craft users, and DIY jewelry maintenance.

Use the sizing tools to check a finger or an existing ring, use the metal mandrel and rubber mallet for gentle reshaping, then finish suitable surfaces with the burnisher and polishing accessories. Clear ring adjusters can help reduce excess space when a ring feels slightly loose.

Key Features

Multiple Ring Sizing Options

Try different sizes with the black plastic ring sizer set, or measure a finger with either the white or black measuring tape with magnifier. The two tapes provide the same basic measuring function in different colors.

Existing Ring Size Checking

Slide an existing ring onto the black US size plastic ring mandrel to check its approximate size quickly and conveniently.

Gentle Ring Reshaping

Support a slightly misshapen ring on the smooth metal mandrel and use the rubber mallet for controlled, gentle taps. The mallet helps reduce direct metal to metal contact during adjustment.

Finishing and Polishing Accessories

The 7 cm agate burnisher, two polishing sticks, and blue and green polishing cloths support light surface finishing and cleaning work on suitable jewelry.

Clear Ring Fit Adjusters

Place a clear ring adjuster inside the lower part of a ring band to help reduce excess space when a ring feels slightly loose. The transparent, low profile design is intended to remain discreet during wear.

Suitable Applications

• Measuring finger and ring sizes
• Checking the approximate size of an existing ring
• Basic ring reshaping and rounding
• Light jewelry cleaning and polishing
• Adjusting the fit of a slightly loose ring
• Jewelry making, repair benches, and DIY maintenance

Important Function Clarification

• The black plastic mandrel is mainly for checking ring size. It is not the primary tool for reshaping rings.
• The metal mandrel is mainly for ring support and reshaping, not precise size measurement.
• The white and black measuring tapes perform the same basic function, so use one at a time.
• Results can vary with ring material, construction, thickness, and shape.

Technical Specifications

Package Contents

• 1 × US size plastic ring mandrel
• 1 × metal ring mandrel with top hole
• 1 × black plastic ring sizer set
• 1 × rubber mallet
• 1 × plastic ring clamp
• 1 × 7 cm agate burnisher
• 1 × white measuring tape with magnifier
• 1 × black measuring tape with magnifier
• 1 × blue polishing cloth
• 1 × green polishing cloth
• 2 × polishing sticks
• 8 × clear ring adjusters

Package disclaimer: Please confirm the package contents upon arrival. Product accessories may be updated by the supplier, and the actual items received take precedence over the list above.

Basic Operating Steps

1. Measure a finger with either measuring tape, or try sizes with the black plastic ring sizer set.
2. Slide an existing ring onto the black plastic mandrel to check its approximate size.
3. Place a slightly misshapen ring on the metal mandrel.
4. Tap gently with the rubber mallet to help restore the ring's round shape.
5. Use the burnisher, polishing sticks, and polishing cloths for suitable finishing work.
6. Install a clear ring adjuster inside a slightly loose ring to help improve its fit.

Voltage and Plug Information

This is a manual jewelry tool kit. It does not require electricity, a voltage supply, or a power plug.

Safety Information

• Use gentle pressure and controlled taps. Do not strike a ring forcefully.
• Use extra caution with delicate gemstone rings, hollow rings, plated jewelry, very thin rings, or unusual shapes.
• Test polishing on a discreet area when the ring material or finish is unknown.
• Keep small parts and polishing accessories away from children.
• Wear suitable eye protection when performing repeated adjustment or finishing work.

Frequently Asked Questions

Can this kit measure ring size?

Yes. Use the ring sizer set or either measuring tape to help determine a finger size, and use the black plastic mandrel to check the approximate size of an existing ring.

Can this kit resize a ring automatically?

No. The tools support basic measuring, gentle reshaping, and fit adjustment. They do not provide automatic resizing or replace professional jewelry services.

Are the two measuring tapes different in function?

No. The white and black tapes provide the same basic function in different colors.

How can I make a loose ring fit more securely?

Install one of the clear ring adjusters along the lower inner side of the ring band. This can help reduce excess space when the ring is only slightly loose.

Support

For product questions or support, contact sales@tooltos.com.