Tooltos KT-2000 5KG Rotary Jewelry Tumbler | 5-Speed Bidirectional Timer

Key Selling Points

• 5KG Barrel Capacity — Larger drum for bigger batches and small production runs.
• 5-Speed Adjustable Control — Select the right speed for different materials and finishes.
• 10-60 Minute Timer — Controlled, repeatable polishing cycles.
• Bidirectional Rotation — Improves surface coverage and polishing consistency.
• Leak-Resistant Polycarbonate Drum — Transparent drum with tight-seal buckle and safety chain.
• Non-Slip Rubber Base — Stable, low-vibration bench operation.
• 110V and 220V Options — For North American and international workshops.

About This Rotary Tumbler

The Tooltos KT-2000 is a 5KG rotary jewelry tumbler polishing machine designed for deburring, surface smoothing and polishing small metal parts in jewelry studios, repair shops and small production environments. With 5-speed control, a 10-60 minute timer and bidirectional rotation, it supports repeatable workflows for rings, pendants, charms, metal findings and small-batch jewelry components.

KT-2000 vs KT-6808

Best For / Not For

Best for small jewelry parts, deburring, surface smoothing, chamfering, small-batch studio finishing, and gold, silver, copper, brass, zinc and aluminum alloys. Not ideal for large or heavy parts exceeding drum capacity, soft stones such as pearls and opals, mirror finishing without additional steps, or continuous industrial production.

Technical Specifications

Pro Tips

• Start with a 15-20 minute cycle and check results before extending.
• Use lower speeds for delicate pieces and higher speeds for heavier deburring.
• Fill the drum to about two-thirds capacity for best tumbling action.
• Add suitable burnishing compound or dish soap to the water when appropriate.
• Remove pearls, opals and other soft stones before tumbling.
• Rinse and dry pieces thoroughly after tumbling.

Frequently Asked Questions

What is the difference between the KT-2000 and KT-6808?
The KT-2000 has a 5KG drum and 60W motor for higher batch volumes; the KT-6808 is a compact 3KG model for occasional use.

Can this produce a mirror finish?
It is effective for deburring, smoothing and pre-polishing. Additional finishing may be needed for a mirror finish.

Can I use it with gemstone-set jewelry?
Use lower speeds and shorter cycles, and remove soft stones such as pearls and opals before tumbling.

How long should I run the machine?
Typical cycles range from 15 to 45 minutes. Start shorter and adjust based on results.

What's Included

• 1 × KT-2000 Rotary Tumbler Polishing Machine
• 1 × 5KG polycarbonate polishing drum
• 1 × 150g carbon steel polishing beads
• 1 × Sealing ring
• 1 × Safety chain

Support

Questions about polishing media, cycle settings or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.