{"title":"Jewelry Engraving and Stone Setting Tools","description":"\u003cp\u003eProfessional jewelry engraving machines and stone setting tools trusted by jewelers and goldsmiths worldwide. Achieve fine detailing, precise carving, and secure stone setting on gold, silver, and platinum with ease.\u003c\/p\u003e\u003ch2\u003eBrowse by Category\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/jewelry-engraving-machines\"\u003e\u003cstrong\u003eJewelry Engraving Machines\u003c\/strong\u003e\u003c\/a\u003e — Pneumatic and electric engravers for high-speed, precise carving and detailing\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/jewelry-stereo-microscopes\"\u003e\u003cstrong\u003eJewelry Stereo Microscopes\u003c\/strong\u003e\u003c\/a\u003e — Binocular microscopes for precision stone setting and micro-inlay work\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/jewelry-engraving-blocks-and-ball-vises\"\u003e\u003cstrong\u003eJewelry Engraving Blocks and Ball Vises\u003c\/strong\u003e\u003c\/a\u003e — 360° swivel ball vises for secure workpiece holding during engraving and setting\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/collections\/jewelry-gravers-and-engraving-cutters\"\u003e\u003cstrong\u003eJewelry Gravers and Engraving Cutters\u003c\/strong\u003e\u003c\/a\u003e — Carving knives, graver sets and engraving tools for wax, metal and stone\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhat tools do I need for jewelry engraving?\u003c\/strong\u003e\u003cbr\u003eFor professional jewelry engraving, you typically need a pneumatic or electric engraving machine, a ball vise or engraving block to hold the workpiece, gravers or engraving cutters, and a stereo microscope for precision stone setting and micro-inlay work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is a ball vise used for in jewelry making?\u003c\/strong\u003e\u003cbr\u003eA ball vise holds rings, pendants, and other jewelry pieces securely during engraving and stone setting. The 360° swivel design allows you to rotate the workpiece to any angle for precise access to every surface.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat is the difference between a pneumatic and electric engraving machine?\u003c\/strong\u003e\u003cbr\u003ePneumatic engraving machines use compressed air to drive the handpiece, offering variable speed and excellent control for detailed work. Electric engravers are more portable and do not require an air compressor, making them ideal for smaller workshops or on-the-go use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a stereo microscope for stone setting?\u003c\/strong\u003e\u003cbr\u003eA stereo microscope is highly recommended for micro-pave, channel setting, and any work requiring extreme precision. It magnifies the work area 7x–45x, reducing eye strain and significantly improving accuracy when setting small stones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I choose the right graver for jewelry engraving?\u003c\/strong\u003e\u003cbr\u003eThe choice of graver depends on the type of engraving and material. Flat gravers are used for bright-cut engraving, round gravers for wax carving and stone setting, and knife gravers for fine line work. Wax carving knife sets are ideal for model making and sculpting before casting.\u003c\/p\u003e\u003cp\u003eAll equipment is professionally tested and backed by Tooltos customer support. Contact us at \u003ca href=\"mailto:sales@tooltos.com\"\u003esales@tooltos.com\u003c\/a\u003e for expert advice.\u003c\/p\u003e","products":[{"product_id":"multi-function-miniature-jewelry-table-saw","title":"Tooltos Miniature Jewelry Table Saw | 90W, 100mm Blade","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e90W motor with 5000RPM no-load speed delivers clean, consistent cuts through non-ferrous metals, stone, wood, glass, and plastic\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e100mm (4 in) blade diameter sized for precision cutting of small jewelry components and gemstone rough material\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e190 x 142mm (7.5 x 5.6 in) work table provides a stable, flat surface for guiding small workpieces accurately through the blade\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eCompact desktop footprint fits on a standard jeweler's bench without requiring a dedicated machine station\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eSuitable for both metallic and non-metallic materials — one tool for cutting metal sheet, stone slabs, wood inlay, and plastic components\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eStraightforward setup with minimal assembly — plug in and start cutting without complex calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Table Saw\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Miniature Jewelry Table Saw is a compact bench-top cutting machine designed for jewelers, lapidary artists, and precision craftspeople who need accurate, repeatable cuts in small-scale materials. The 100mm blade and 190 x 142mm work table are sized specifically for jewelry-scale workpieces — metal sheet, stone slabs, wood inlay strips, glass, and plastic — where a full-size table saw would be impractical and difficult to control.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eRunning at 5000RPM with a 90W motor, it provides enough power for clean cuts through non-ferrous metals and non-metallic materials up to 8mm (0.3 in) deep. The flat work table keeps small pieces stable and square during cutting, reducing the risk of chipping or irregular cuts that are common when using rotary tools freehand.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis machine operates on 110-120V \/ 50Hz only. It is not available in a 220V version. Please verify your local power supply before ordering. A step-down transformer is required for use in 220V regions.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelers cutting non-ferrous metal sheet, wire, and small stock pieces to length or shape\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMaterials thicker than 8mm (0.3 in) — the maximum cutting depth for non-metallic materials and stone is 8mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eLapidary artists slicing stone rough, tile, and mineral specimens at jewelry scale\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e220V power supplies — this machine is 110-120V only and requires a transformer for use outside North America\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eCraftspeople cutting wood inlay, glass, and plastic components for jewelry and decorative work\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eCutting hardened steel, stainless steel, or ferrous metals — this saw is designed for non-ferrous metals only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkshops needing a compact, dedicated cutting station that does not take up significant bench space\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHigh-volume production cutting — this is a precision bench tool designed for small-batch and detail work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMotor Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e90W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eNo-Load Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e5,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBlade Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e100mm (4.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWork Table Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e190 x 142mm (7.5 x 5.6 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMax Cutting Depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e8mm (0.3 in) for non-metallic materials and stone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e110-120V \/ 50Hz only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCompatible Materials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eNon-ferrous metals, stone, wood, glass, plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse a blade appropriate for the material — a diamond blade for stone and glass, a non-ferrous metal blade for gold, silver, and brass. Using the wrong blade type reduces cut quality and shortens blade life.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eFeed the workpiece slowly and steadily into the blade — forcing the cut increases the risk of chipping on stone and glass, and can cause the blade to bind on metal.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse a fence or guide when making straight cuts — even small deviations in feed angle are amplified at jewelry scale and affect the fit of cut pieces.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eKeep the work table clean and free of debris between cuts — small chips under the workpiece can cause it to rock and produce uneven cuts.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eAlways allow the blade to reach full speed before feeding material — starting a cut before the motor is at speed increases wear on both the blade and the motor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this saw available in 220V?\u003c\/strong\u003e\u003cbr\u003eNo. This machine operates on 110-120V \/ 50Hz only. There is no 220V version. If you are in a 220V region (Europe, Asia, Australia, etc.), you will need a step-down transformer to use this machine safely.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the maximum cutting depth?\u003c\/strong\u003e\u003cbr\u003eThe maximum cutting depth is 8mm (0.3 in) for non-metallic materials and stone. For non-ferrous metals, the practical cutting depth depends on the material hardness and blade type used.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan this saw cut hardened steel or stainless steel?\u003c\/strong\u003e\u003cbr\u003eNo. This saw is designed for non-ferrous metals (gold, silver, brass, copper, aluminum) and non-metallic materials. It is not rated for hardened steel, stainless steel, or ferrous metals.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes the blade come included?\u003c\/strong\u003e\u003cbr\u003eThe package includes the mini table saw and an instruction manual. A blade appropriate for your material type may need to be sourced separately depending on your application. Please check the package contents before ordering if a specific blade type is required.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat size blade does this saw use?\u003c\/strong\u003e\u003cbr\u003eThe saw uses a 100mm (4 in) diameter blade. When sourcing replacement or specialty blades, ensure the blade diameter and arbor size match the machine specifications.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the saw?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with blade compatibility, setup, and troubleshooting.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Miniature jewelry table saw\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about blade compatibility, voltage requirements, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":46021709562155,"sku":"JHCGCG004","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tool-multifunction-mini-bench-saw-42189918699819.jpg?v=1693936608"},{"product_id":"16-in-1-micro-air-grinder-kit-professional-pneumatic-tools-for-grinding-cutting-carving-engraving-56000rpm-rotary-tool","title":"Tooltos Micro Air Grinder Kit | 65000RPM, 16-in-1, Pneumatic","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e65,000 RPM top speed delivers fast, clean material removal for grinding, cutting, chamfering, carving, and polishing in a single tool\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eDual collet system — 3mm and 2.38mm — accepts both standard jewelry burs and die grinder accessories without adapters\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003ePen-shaped body (132mm \/ 5.2 in long, approx. 176g \/ 6.2 oz) fits naturally in hand for precise control during detail work\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eRear exhaust port directs air away from the workpiece, keeping your view clear and preventing debris from blowing back toward you\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e10 grinding heads included — covers the most common shapes for metal grinding, stone carving, and surface finishing\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eComplete kit includes oiler, spanners, collet, and quick-release air hose adaptor — ready to connect to your compressor and start working\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Air Grinder\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Micro Air Grinder is a professional-grade pneumatic rotary tool designed for jewelers, metalworkers, and precision craftspeople who need high-speed grinding and finishing capability in a compact, hand-held form. Running at up to 65,000 RPM on 90 PSI compressed air, it delivers consistent power for grinding, cutting, chamfering, carving, and polishing across metals, stones, and similar materials.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe pen-shaped body keeps the tool balanced and easy to maneuver in tight areas, and the rear exhaust design prevents air from disturbing fine work or blowing debris toward the operator. The dual collet system means you can switch between 3mm and 2.38mm accessories without needing a separate adapter, making this kit compatible with a wide range of standard grinding and carving bits.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelers and metalworkers needing a high-speed rotary tool for grinding, deburring, and surface finishing\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eUse without an air compressor — this is a pneumatic tool that requires a compressed air supply (min. 90 PSI \/ 6.2 bar) not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eStone carvers and jade artists who need precise, high-RPM material removal in a lightweight pen-style tool\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eElectric-only workshops without a compressor — for electric rotary tools, see the Tooltos 204 Micro Motor Engraver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkshops already running compressed air who want a versatile, low-maintenance grinding tool\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHeavy-duty industrial cutting of hardened steel or structural materials beyond jewelry and craft applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMold makers and engravers who need a compact tool for chamfering, carving, and detail polishing\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBits with shanks larger than 3mm — the maximum collet size is 3mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eTop Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e65,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eRequired Air Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e90 PSI (6.2 bar)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eAir Consumption\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e60 L\/min (2.1 CFM)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCollet Sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e3mm and 2.38mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eTool Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e132mm (5.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eTool Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 176g (6.2 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e340 x 200 x 50mm (13.4 x 7.9 x 2.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePackage Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 697g (1.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eExhaust Direction\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eRear exhaust\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis is a pneumatic tool. An air compressor capable of supplying at least 90 PSI (6.2 bar) and 60 L\/min (2.1 CFM) is required and is not included. Please verify your compressor output before ordering.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eAdd a few drops of tool oil into the air inlet before each use — the included oiler keeps internal components lubricated and extends the working life of the grinder significantly.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse an inline air filter and moisture trap between your compressor and the tool — moisture in the air line causes internal corrosion and inconsistent speed over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eStart at lower pressure and increase gradually when working on new materials — 65,000 RPM is the maximum, and most jewelry grinding tasks perform well at 70-80 PSI.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the quick-release adaptor to disconnect the air hose safely before changing collets or grinding heads — never change accessories while the air supply is connected.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eMatch the grinding head shape to the task: cylindrical heads for flat surface grinding, ball heads for concave areas, and cone heads for chamfering and edge work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this kit include an air compressor?\u003c\/strong\u003e\u003cbr\u003eNo. An air compressor is required but not included. Your compressor must supply at least 90 PSI (6.2 bar) and 60 L\/min (2.1 CFM). Most standard workshop compressors in this range are compatible.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat collet sizes does this grinder accept?\u003c\/strong\u003e\u003cbr\u003eThe kit includes both a 3mm and a 2.38mm collet. This covers the two most common shank sizes used in jewelry grinding and carving accessories. Bits with shanks larger than 3mm are not compatible.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat materials can this grinder work on?\u003c\/strong\u003e\u003cbr\u003eThe micro air grinder is suitable for gold, silver, brass, copper, aluminum, jade, stone, and similar materials used in jewelry and craft work. It is not designed for hardened steel or structural industrial materials.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow do I lubricate the tool?\u003c\/strong\u003e\u003cbr\u003eAdd 2-3 drops of pneumatic tool oil into the air inlet before each use. The included oiler is designed for this purpose. Regular lubrication prevents internal wear and maintains consistent speed performance.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan I use this tool for engraving as well as grinding?\u003c\/strong\u003e\u003cbr\u003eYes. The high RPM and pen-style grip make it suitable for light engraving and carving work in addition to grinding, chamfering, and polishing. For dedicated impact engraving with foot pedal control, see the Tooltos GraverMate Pneumatic Engraver.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the kit?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with compressor compatibility, accessory selection, and troubleshooting.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Micro air grinder (pen-style, 132mm)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e10 x Grinding heads (assorted shapes)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 3mm collet\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 2.38mm collet (included in kit)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Quick-release air hose adaptor\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Pneumatic tool oiler\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Spanners\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about compressor requirements, collet compatibility, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":46021922292011,"sku":"JHJGKD023","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tool-16-in-1-micro-air-grinder-kit-professional-pneumatic-tools-42193627054379.jpg?v=1693900068"},{"product_id":"multi-functional-grinder-jade-jewelry-table-saw","title":"Tooltos Multi-Function Jade Jewelry Table Saw | 480W, Flexible Shaft","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e480W motor at 10,000RPM delivers the power needed for cutting, grinding, and polishing jade, gemstones, metal, and wood in a single machine\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e100cm (39.4 in) removable flexible shaft with 0.3-4mm handpiece extends reach for carving and polishing work away from the main table\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eAdjustable angle scale and angle ruler allow precise bevel and miter cuts for stone and jade shaping\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eThreaded arbor accepts interchangeable accessories — saw blades, sanding wheels, fiber wheels, and polishing wheels — without additional adapters\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eAnti-slip base with blade guard and dust shield for stable, safer operation during extended cutting and grinding sessions\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eUser-replaceable carbon brushes extend motor life — two backup brushes included, accessible by unscrewing the carbon brush cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Table Saw\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Multi-Function Jade Jewelry Table Saw is a 480W bench-top machine designed for jewelers, lapidary artists, and jade carvers who need a versatile cutting and finishing station for gemstones, jade, metal, and wood. Unlike single-purpose saws, this machine combines a table saw with a flexible shaft grinder in one unit — use the saw table for straight cuts and slicing, then switch to the flexible shaft handpiece for carving, polishing, and detail grinding without changing machines.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe 10,000RPM motor provides consistent power across the full range of accessories, and the adjustable angle scale makes it practical for bevel cuts and angled shaping work on stone and jade. The included plastic water tank supports wet cutting for stone and jade, which reduces dust and extends blade life. If you need a smaller, lighter saw for non-ferrous metal and non-metallic materials on a 110V supply, see the Tooltos Miniature Jewelry Table Saw.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis machine operates on 220V \/ 50Hz only. There is no 110V version. Please verify your local power supply before ordering. For 110V regions (North America), a step-up transformer is required.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJade carvers and lapidary artists who need both a cutting table and a flexible shaft grinder in one machine\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e110V power supplies — this machine is 220V only. For 110V, see the Tooltos Miniature Jewelry Table Saw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelers cutting and polishing gemstones, onyx, jade, metal, and wood with a single bench-top station\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDry cutting of stone and jade without water cooling — wet cutting with the included water tank is strongly recommended for stone and jade to control dust and heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkshops needing a versatile machine for carving, sanding, polishing, and cutting across multiple material types\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHigh-volume production cutting — this is a precision bench tool designed for small-batch craft and jewelry work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDIY craftspeople working with rocks, minerals, wood inlay, and decorative materials at bench scale\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eCutting hardened steel or ferrous metals — this machine is designed for non-ferrous metals, stone, jade, wood, and similar craft materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMotor Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e480W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eSpeed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e10,000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e220V \/ 50Hz only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eFlexible Shaft Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e100cm (39.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eHandpiece Chuck Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0.3 - 4mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eChuck Group Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0.6 - 6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e250 x 135 x 145mm (9.8 x 5.3 x 5.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 7kg (15.4 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCompatible Materials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eJade, gemstone, onyx, non-ferrous metal, wood, rock, plastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eAlways use the water tank when cutting jade and stone — wet cutting controls dust, reduces heat buildup at the blade, and significantly extends blade life compared to dry cutting.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the angle ruler and adjustable scale to set your cut angle before starting — small angular errors in stone and jade are difficult to correct after the cut is made.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eFeed material slowly and steadily into the blade — forcing the cut on hard stone can cause blade deflection and uneven cuts or chipping at the exit edge.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eReplace carbon brushes when you notice reduced power or inconsistent speed — two backup brushes are included and replacement requires only a screwdriver to access the brush cover.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the flexible shaft handpiece for finishing and polishing after cutting — switching between the saw table and the handpiece without changing machines saves significant setup time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this machine available in 110V?\u003c\/strong\u003e\u003cbr\u003eNo. This machine operates on 220V \/ 50Hz only. There is no 110V version. If you are in North America or another 110V region, you will need a step-up transformer. For a 110V table saw, see the Tooltos Miniature Jewelry Table Saw.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDo I need to use water when cutting jade and stone?\u003c\/strong\u003e\u003cbr\u003eWet cutting is strongly recommended for jade and stone. The included plastic water tank is designed for this purpose. Dry cutting of hard stone generates significant heat and dust, which shortens blade life and creates a health hazard from fine silica particles.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the flexible shaft used for?\u003c\/strong\u003e\u003cbr\u003eThe 100cm flexible shaft connects to the machine and accepts a 0.3-4mm handpiece for carving, grinding, and polishing work. It extends the machine's capability beyond the saw table, allowing you to work on curved surfaces and detailed areas that cannot be fed through the blade.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan this machine cut ferrous metals or hardened steel?\u003c\/strong\u003e\u003cbr\u003eNo. This machine is designed for jade, gemstones, non-ferrous metals (gold, silver, brass, copper, aluminum), wood, and similar craft materials. It is not rated for hardened steel, stainless steel, or ferrous metals.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow do I replace the carbon brushes?\u003c\/strong\u003e\u003cbr\u003eUnscrew the carbon brush cover with a standard screwdriver to access the brushes. Two backup brushes are included in the kit. Replace when you notice reduced motor power or inconsistent speed. No professional servicing is required.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the machine?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with blade selection, accessory compatibility, and setup questions.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Multi-function table saw machine\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 100cm rubber flexible shaft\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 0.3-4mm working handpiece\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 0.6-6mm chuck group\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Saw blades\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Saw blade connecting shaft\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Fiber wheel\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Polishing connecting rods\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Pressing plates\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Angle ruler for cutting\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Angle ruler connection shaft\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Shield connecting shaft\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Saw blade fastener\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Protective cover\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Plastic water tank\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Backup carbon brushes\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Hexagon wrenches\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Chuck keys\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Wrenches\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x User manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about blade selection, voltage requirements, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"220v","offer_id":50441190244651,"sku":"JHCGCG003","price":189.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tool-multi-functional-mini-jade-table-saw-45670361334059.jpg?v=1715754936"},{"product_id":"electric-engraved-pen-jewelry-engraver-pen-mini-electric-marking-pen-jewelry-engraving-tools","title":"Electric engraved Mini electric marking pen","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eVoltage: 220V\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFrequency: 50\/60Hz\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eWeight: about 0.35Kg\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSize: 210x170x50mm\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\u003c\/ol\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":46021950964011,"sku":"JHDKKZ014","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tool-electric-engraved-mini-electric-marking-pen-42190714798379.jpg?v=1693918062"},{"product_id":"double-head-pneumatic-jewelry-engraving-machine","title":"Tooltos 8000RPM Pneumatic Jewelry Engraving Machine with Dual Handpieces \u0026 Foot Pedal","description":"\u003cdiv style=\"font-family: inherit; color: inherit;\"\u003e\n\u003cp style=\"font-size: 15px; font-weight: 600; color: #555; margin-bottom: 0.5rem; letter-spacing: 0.03em;\"\u003eBuilt for Professional Jewelry Engraving and Precision Metalwork\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.25rem;\"\u003eThe Tooltos 400–8000RPM Pneumatic Jewelry Engraving Machine is designed for jewelers, stone setters, and metal engravers who need controlled handpiece response for detailed metal work. With dual handpieces, foot pedal control, an integrated pressure gauge, and a built-in air filter, it supports engraving, texture work, bead-edge detailing, stone-setting preparation, and precision workshop applications.\u003c\/p\u003e\n\u003cdiv style=\"margin-bottom: 1.5rem;\"\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden;\"\u003e\u003ciframe style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%; border: 0;\" src=\"https:\/\/www.youtube.com\/embed\/uFRKjPNphhw\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"background-color: #fff8e1; border: 1px solid #ffe082; border-radius: 6px; padding: 1rem 1.25rem; margin-bottom: 1.5rem;\"\u003e\n\u003cp style=\"font-size: 15px; font-weight: 600; margin: 0 0 0.4rem;\"\u003e⚠️ Air Compressor Required\u003c\/p\u003e\n\u003cp style=\"font-size: 15px; line-height: 1.7; margin: 0;\"\u003eThis machine requires an external air compressor with \u003cstrong\u003e0.15–0.25 MPa\u003c\/strong\u003e working pressure. The air compressor is not included and must be purchased separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eAir Compressor Compatibility\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003eThis engraving machine requires an external air compressor to operate. For best performance, use clean, dry, oil-free compressed air. If using an oil-type compressor, an oil-removal filter is recommended to help protect the internal air system.\u003c\/p\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eRequired air pressure:\u003c\/strong\u003e 0.15–0.25 MPa\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eAir compressor:\u003c\/strong\u003e Not included — must be purchased separately\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eAir quality:\u003c\/strong\u003e Clean, dry, oil-free compressed air recommended\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eA stable regulated air supply helps improve handpiece response and engraving consistency\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eKey Features\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003e400–8000RPM Variable Speed Control\u003c\/strong\u003e — Wide speed range covers everything from slow, controlled detail work to fast surface engraving, with smooth adjustment via the front control panel.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eDual Handpiece Design\u003c\/strong\u003e — Two ergonomic handpieces provide two-handed stability and control during engraving, helping reduce hand fatigue and support better control during detailed work.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eFoot Pedal Control\u003c\/strong\u003e — Controls handpiece activation and power response, keeping both hands on the workpiece and improving workflow efficiency during active engraving.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eProfessional Pressure Gauge\u003c\/strong\u003e — Built-in gauge lets you monitor and adjust air pressure in real time for consistent engraving performance across different materials and engraving depths.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eBuilt-In Filter System\u003c\/strong\u003e — Integrated air filter removes moisture and contaminants from the air supply, protecting the internal mechanism and extending machine service life.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eOne-Piece Stamped Metal Shell\u003c\/strong\u003e — Frosted metal construction provides a durable, professional-grade housing that resists workshop wear and maintains structural integrity over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eBest For\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eProfessional jewelers doing detailed engraving on rings, pendants, and bracelets\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eMetal engravers working on gold, silver, copper, and brass surfaces\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eWatch repair technicians needing precision engraving on small components\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eJewelry designers adding surface textures, patterns, and custom lettering\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eWorkshops requiring hands-free speed control for high-volume engraving work\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eNot For\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eUsers without access to an air compressor — this machine requires 0.15–0.25 MPa air pressure to operate\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eEngraving on very hard metals such as hardened steel or titanium — performance depends on the engraving bit used\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eHobbyist or occasional single-piece use — this machine is designed for professional workshop environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eTypical Workshop Applications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f5f5f5;\"\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eSuggested Speed Range\u003c\/th\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eJewelry Engraving\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e2000–5000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eRings, pendants, bracelets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eMetal Carving\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e3000–6000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eGold, silver, copper, brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eMilgrain \u0026amp; Bead Edge Work\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e1000–3000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eFine edge detailing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eStone Setting Preparation\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e400–2000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eSeat cutting and prong work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eWatch Engraving\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e1000–4000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eCases, backs, bezels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eSurface Texturing\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e4000–8000 RPM\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eMatte, hammered, pattern finishes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f5f5f5;\"\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e110V \/ 220V (select at checkout)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e50 \/ 60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eSpeed Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e400–8000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003ePressure Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e0–4 kg\/cm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eRequired Air Pressure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e0.15–0.25 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e29 × 13 × 21 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e9.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eHandpieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eDual pneumatic handpieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003eShell Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eOne-piece stamped frosted metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eQuick Start Guide\u003c\/h2\u003e\n\u003col style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eConnect air supply\u003c\/strong\u003e — Attach the connection tube to your air compressor. Set compressor output to 0.15–0.25 MPa.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eConnect power\u003c\/strong\u003e — Plug in the power cord and connect the foot pedal.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eInstall engraving bit\u003c\/strong\u003e — Insert your engraving tip into the handpiece and secure it.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eSet speed\u003c\/strong\u003e — Adjust the speed control dial to your desired RPM for the material and task.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eCheck pressure gauge\u003c\/strong\u003e — Verify air pressure is within the 0–4 kg\/cm² operating range.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eBegin engraving\u003c\/strong\u003e — Press the foot pedal to activate the handpiece. Use both handpieces for stability and control.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eAfter use\u003c\/strong\u003e — Release foot pedal, power off, and disconnect air supply before removing the engraving bit.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eStart at a lower speed when working on a new material or unfamiliar piece — increase RPM gradually once you confirm the engraving depth and response.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eUse the foot pedal to control handpiece power rather than applying extra hand pressure — this gives you more consistent depth control and reduces tip wear.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eCheck and drain the built-in filter regularly — moisture buildup in the air line reduces machine performance and can damage internal components over time.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003eKeep your air compressor pressure consistent — pressure fluctuations above 0.25 MPa can affect engraving speed stability and tip wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eIs an air compressor included?\u003c\/strong\u003e\u003cbr\u003eNo. This machine requires an external air compressor with 0.15–0.25 MPa working pressure. The compressor must be purchased separately. Please confirm your compressor output before ordering.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eWhich voltage should I select?\u003c\/strong\u003e\u003cbr\u003eSelect 110V for US and Canada. Select 220V for Europe, Asia, Australia, UK, and most other international markets. Please confirm your local voltage before ordering.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eCan this machine engrave hard metals like steel or titanium?\u003c\/strong\u003e\u003cbr\u003ePerformance on very hard metals depends on the engraving bit used. This machine is optimized for jewelry metals including gold, silver, copper, and brass. For hardened steel or titanium, use appropriate carbide or diamond-tipped engraving bits.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eHow do I control the engraving speed?\u003c\/strong\u003e\u003cbr\u003eSpeed is adjusted via the front control panel dial, which covers the full 400–8000 RPM range. The foot pedal controls handpiece activation and power response — speed range adjustment is done manually on the machine.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eWhat is the purpose of the dual handpieces?\u003c\/strong\u003e\u003cbr\u003eThe two handpieces allow two-handed operation, providing greater stability and control during fine detail engraving. This helps reduce hand fatigue and supports better control on small or intricate workpieces.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eHow often should I clean the filter?\u003c\/strong\u003e\u003cbr\u003eCheck the built-in filter after every 8–10 hours of use. Drain any accumulated moisture and replace the filter element when it shows signs of contamination or reduced airflow.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.75rem;\"\u003e\u003cstrong\u003eWhat engraving bits are compatible?\u003c\/strong\u003e\u003cbr\u003eThis machine is compatible with standard pneumatic engraving bits. Bit selection depends on the material and engraving style. Refer to the included instruction manual for recommended bit types and sizes.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.25rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Pneumatic Engraving Machine\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e2 × Engraving Handpieces\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Foot Pedal\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Air Filter\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Connection Tube\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Power Cord \/ Adapter\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Instruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eWhy Choose Tooltos\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.25rem;\"\u003eTooltos focuses on professional jewelry tools and workshop machines designed for practical production use. This pneumatic engraving machine offers 400–8000RPM variable speed, dual-handpiece stability, foot pedal activation control, and a built-in filter system — giving professional jewelers, engravers, and precision craftsmen a reliable, responsive engraving setup for demanding daily workshop work.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eNeed Help?\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.5rem;\"\u003eQuestions about air compressor compatibility, voltage, engraving bits, or your order? Contact the Tooltos support team at \u003cstrong\u003esales@tooltos.com\u003c\/strong\u003e. We typically respond within 24 hours.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"110V","offer_id":47471768404267,"sku":"JHDKDKS40","price":299.99,"currency_code":"USD","in_stock":true},{"title":"220V","offer_id":47471768437035,"sku":"JHDKDKS12","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-110v-tooltos-double-handle-jewelry-pneumatic-engraving-machine-45908205830443.jpg?v=1716882994"},{"product_id":"single-head-gravermate-jewelry-pneumatic-engraving-machine","title":"Tooltos GraverMate Pneumatic Engraver | 80W Foot Pedal","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eFoot pedal control keeps both hands free for precise positioning and steady workpiece handling\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e80W motor delivers consistent 1400RPM drive speed for reliable performance across extended sessions\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eAdjustable air pressure (0-3 kg\/cm2 \/ 0-43 PSI) lets you fine-tune impact force for different metals and stone settings\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eCompatible with standard GraverMate handpieces — works with your existing tool collection\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eCompact desktop footprint fits comfortably on a jeweler's bench without crowding your workspace\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eComplete kit includes handpiece, foot pedal, and all necessary connections — ready to engrave out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Engraving Machine\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos GraverMate Pneumatic Engraver is built for jewelers who need consistent, controllable impact engraving without hand fatigue. Powered by an 80W motor and driven by compressed air, it delivers smooth, repeatable strokes that are essential for fine detail work — whether you are engraving lettering, setting stones, or carving decorative patterns.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe foot pedal design is a practical advantage in a professional setting: you control start and stop with your foot, leaving both hands free to guide the handpiece and secure the workpiece. Air pressure is adjustable on the fly, so you can shift from light surface engraving to heavier stone-setting work without stopping to reconfigure the machine.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eProfessional jewelers doing daily engraving and stone setting\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eLaser engraving — this is a pneumatic impact tool, not a laser device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBench jewelers engraving gold, silver, platinum, and brass\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eUse without an air compressor — a compressor (min. 0.03 m3\/min \/ 1.06 CFM) is required and not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eStone setting work requiring precise, repeatable impact force\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eEngraving hardened steel or industrial-grade materials beyond jewelry metals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelry schools and training workshops needing a reliable entry-to-professional tool\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHobbyists who engrave occasionally — consider a rotary engraver for lighter, less frequent use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eDrive Speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e1400 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eAir Pressure Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0-3 kg\/cm2 (0-43 PSI)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCompressor Requirement\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eMin. 0.03 m3\/min (1.06 CFM) — not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eVoltage Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e110V \/ 220V (select at checkout)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 200 x 120 x 150 mm (7.9 x 4.7 x 5.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 2.5 kg (5.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eHandpiece Compatibility\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eStandard GraverMate handpieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nAn air compressor is required to operate this machine and is not included. Please ensure your compressor meets the minimum output of 0.03 m3\/min (1.06 CFM) before use.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eStart at the lowest air pressure setting and increase gradually — most engraving tasks on gold and silver require less pressure than you expect.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the foot pedal to pulse the machine in short bursts when working near stone edges to avoid chipping or cracking the setting.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eKeep the air line free of moisture by using an inline air filter or dryer — moisture in the line can affect consistent stroke performance over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eSecure your workpiece firmly in a ring clamp or engraving block before starting — the foot pedal frees your hands specifically so you can maintain a stable grip throughout.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eClean the handpiece connection point regularly to prevent air leaks that reduce impact consistency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this machine come with an air compressor?\u003c\/strong\u003e\u003cbr\u003eNo. An air compressor is required but not included. Your compressor must provide a minimum output of 0.03 m3\/min (1.06 CFM). Most standard workshop compressors in this range are compatible.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhich voltage should I choose — 110V or 220V?\u003c\/strong\u003e\u003cbr\u003eSelect the voltage that matches your local power supply. North America and most of the Americas use 110V. Europe, Asia, Australia, and most other regions use 220V. If you are unsure, check the outlet specifications in your workshop.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan I use this machine for laser engraving?\u003c\/strong\u003e\u003cbr\u003eNo. This is a pneumatic impact engraver — it uses compressed air to drive a handpiece mechanically. It is not a laser device and cannot perform laser engraving.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat metals can this machine engrave?\u003c\/strong\u003e\u003cbr\u003eThe GraverMate is suitable for engraving gold, silver, platinum, brass, and copper — the standard metals used in jewelry making. It is not designed for hardened steel or industrial alloys.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this machine suitable for beginners?\u003c\/strong\u003e\u003cbr\u003eIt can be used by beginners, but it is designed and optimized for professional bench jewelers. If you are new to engraving, we recommend starting at the lowest pressure setting and practicing on scrap metal before working on finished pieces.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the machine?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, compatibility questions, and troubleshooting.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x GraverMate pneumatic engraving machine (80W)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Foot pedal control\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Handpiece\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Air connection hose\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Power cable (voltage-matched to selected variant)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUser manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about setup, compressor compatibility, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"110V","offer_id":47542462480683,"sku":"JHDKDKS26","price":259.99,"currency_code":"USD","in_stock":true},{"title":"220V","offer_id":47542462513451,"sku":"JHDKDKS08","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-110v-tooltos-single-handle-gravermate-jewelry-pneumatic-engraving-machine-45647028781355.jpg?v=1715659013"},{"product_id":"double-head-graver-helper-jewelry-pneumatic-engraving-machine","title":"Tooltos Pneumatic Engraving Machine | Dual Handpiece, 60W","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eDual Handpiece Design\u003c\/strong\u003e — Install two graver handpieces simultaneously and switch between them with the selector knob; no stopping to change bits between tasks.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e100-4000RPM Foot Pedal Speed Control\u003c\/strong\u003e — Stepless foot pedal throttle keeps both hands free to hold and guide the handpiece for precise engraving.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eAdjustable Air Pressure (0-3 kg\/cm2)\u003c\/strong\u003e — Pressure regulator with gauge allows precise depth control from light stippling to deep cutting.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e110V and 220V Available\u003c\/strong\u003e — Select the correct voltage for North American or international workshop use.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eWide Material Compatibility\u003c\/strong\u003e — Engraving, stone setting, stippling, matte finishing, and crystal stipple work on metal, stone, jade, and other materials.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e60W Motor\u003c\/strong\u003e — Consistent power output for sustained professional workshop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Engraving Machine\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Dual Handpiece Pneumatic Engraving Machine is designed for jewelers, stone setters, and engravers who need precise, controlled impact engraving without frequent bit changes. Two graver handpieces install simultaneously and switch via the selector knob, keeping workflow uninterrupted. The foot pedal provides stepless speed control from 100 to 4000RPM, while the adjustable air pressure regulator allows precise depth control for engraving, stone setting, stippling, and matte finishing on metal, stone, jade, and other materials.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eAvailable in 110V for North America and 220V for international use. An external air compressor is required and is not included.\u003c\/p\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e An external air compressor is required for operation and is NOT included. Graver bits and handpiece accessories are also NOT included and must be purchased separately.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eJewelry engraving on metal, stone, and jade\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eUse without an external air compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eStone setting (bezel, pave, channel)\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eHigh-volume industrial engraving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eStippling and matte finishing\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eRotary-only engraving applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eWorkflows requiring two graver bits ready simultaneously\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eEngravers who only need a single handpiece setup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e110V \/ 220V, 50-60Hz (select at order)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eSpeed Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e100-4000 RPM (foot pedal stepless control)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eAir Pressure Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0-3 kg\/cm2 (adjustable with regulator and gauge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eHandpieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2 (dual handpiece, selector knob switching)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e260 x 205 x 160 mm (10.2 x 8.1 x 6.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e8 kg (17.6 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCompatible Materials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eGold, silver, copper, brass, stone, jade, crystal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eAir Compressor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eRequired — not included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eAlways verify the selector knob position\u003c\/strong\u003e before pressing the foot pedal to confirm which handpiece is active.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eStart with lower air pressure\u003c\/strong\u003e and increase gradually — lower pressure for delicate engraving and stone setting, higher pressure for harder materials.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eUse the dual handpiece setup strategically\u003c\/strong\u003e — keep one bit for cutting and one for finishing so you can switch instantly without stopping work.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eCheck all air line connections\u003c\/strong\u003e before starting — air leaks cause inconsistent impact and pressure loss during engraving.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eMonitor the pressure gauge\u003c\/strong\u003e throughout a session to maintain consistent engraving depth across the entire workpiece.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this machine require an air compressor?\u003c\/strong\u003e\u003cbr\u003eYes. An external air compressor is required for operation and is not included. A compressor capable of delivering at least 3 kg\/cm2 (approx. 43 PSI) is recommended.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the advantage of the dual handpiece design?\u003c\/strong\u003e\u003cbr\u003eTwo graver handpieces can be installed simultaneously. Switch between them using the selector knob without stopping to change bits — ideal for workflows requiring multiple graver types in sequence.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhich voltage should I order?\u003c\/strong\u003e\u003cbr\u003eSelect 110V for North America (US, Canada, Mexico). Select 220V for Europe, Asia, Australia, and most other international locations. Ordering the wrong voltage will damage the machine.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan this machine be used for stone setting?\u003c\/strong\u003e\u003cbr\u003eYes. The precise impact control and adjustable pressure make it well-suited for bezel, pave, and channel stone setting work.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eAre graver bits included?\u003c\/strong\u003e\u003cbr\u003eNo. Graver bits and handpiece accessories must be purchased separately. Contact sales@tooltos.com for compatible accessory recommendations.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow do I contact Tooltos if I have a question about my order?\u003c\/strong\u003e\u003cbr\u003eEmail the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Tooltos Dual Handpiece Pneumatic Engraving Machine (main unit)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Pneumatic graver handpieces\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Connecting pipe\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Foot pedal\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Hex key\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Spring\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Power cord\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x English user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about compressor requirements, voltage selection, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"110V","offer_id":47542582444331,"sku":"JHDKDKS37","price":289.99,"currency_code":"USD","in_stock":true},{"title":"220V","offer_id":47542582477099,"sku":"JHDKDKS36","price":289.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-110v-tooltos-double-handle-graver-helper-jewelry-pneumatic-engraving-machine-45670052462891.jpg?v=1715753324"},{"product_id":"character-letter-block-inner-ring-engraver-machine","title":"Tooltos Inside Ring Engraver | Diamond Nib, 1.5-2mm Letter Block","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eDiamond Nib Engraving Pen\u003c\/strong\u003e — Sharp diamond tip delivers clean, precise lettering on the inside of rings with automatic centering guided by the letter block plate.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eDual-Sided Letter Block Plate\u003c\/strong\u003e — 1.5mm and 2.0mm character heights; supports English letters and Arabic numerals.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e360-Degree Rotating Jaw\u003c\/strong\u003e — Accommodates narrow, wide, and set rings; rotates fully for complete inside-ring access.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eAll-Metal Aluminum Alloy Body\u003c\/strong\u003e — Solid, durable construction with adjustable foot height for level bench operation.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eWide Metal Compatibility\u003c\/strong\u003e — Engraves gold, silver, copper, platinum, and other non-ferrous metals.\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eFully Manual Operation\u003c\/strong\u003e — No electricity required; hand-guided pen gives the jeweler full control over depth and pressure from the first use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Inside Ring Engraver\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Inside Ring Engraver Machine is a professional manual engraving tool designed for jewelers, goldsmiths, and custom jewelry studios that need to add personalized text to the inside of rings quickly and accurately. The diamond nib pen traces letter block characters from the dual-sided plate, transferring clean 1.5mm or 2.0mm lettering directly onto the ring interior.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe 360-degree rotating jaw holds narrow, wide, and set rings securely while the adjustable aluminum alloy base keeps the machine level on any workbench. No electricity, no steep learning curve — consistent inside-ring engraving from the first use.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eInside ring engraving in 1.5mm or 2.0mm characters\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eOutside surface engraving\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eEnglish letters and Arabic numerals\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eCustom fonts or script lettering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eGold, silver, copper, and platinum rings\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eSteel or titanium rings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eNarrow, wide, and set ring styles\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eCharacters smaller than 1.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eCustom jewelry studios and repair shops without laser equipment\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eHigh-volume automated production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBody Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eEngraving Tip\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eDiamond nib\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCharacter Heights\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e1.5mm and 2.0mm (dual-sided plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCharacter Set\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eEnglish letters, Arabic numerals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eJaw Rotation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e360 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e235 x 23 x 41.5 cm (92.5 x 9.1 x 16.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eApprox. 6.5 kg (14.3 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eCompatible Metals\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eGold, silver, copper, platinum, and non-ferrous alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePower Required\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eNone — fully manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eClean the ring interior first\u003c\/strong\u003e — Wipe with a polishing cloth to remove oils before engraving; oils cause the nib to slip and produce uneven lines.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003ePractice on a copper test ring\u003c\/strong\u003e — Run through the full letter sequence on scrap metal before engraving a finished piece.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eApply light, consistent pressure\u003c\/strong\u003e — Let the diamond nib do the work rather than forcing it; excessive pressure causes gouging and uneven depth.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eMatch plate size to band width\u003c\/strong\u003e — Use the 1.5mm plate for narrow bands and the 2.0mm plate for wider shanks to maintain visual proportion.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eLevel the base before starting\u003c\/strong\u003e — Adjust the foot height until the machine sits perfectly level; an unlevel base causes uneven engraving depth across the character run.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan this machine engrave the outside of a ring?\u003c\/strong\u003e\u003cbr\u003eNo. This tool is specifically designed for inside ring engraving. The diamond nib and jaw geometry are optimized for interior surfaces only.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat character sizes are available?\u003c\/strong\u003e\u003cbr\u003eThe dual-sided letter block plate provides 1.5mm and 2.0mm character heights, supporting English letters and Arabic numerals. Characters smaller than 1.5mm are not supported.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan it engrave steel or titanium rings?\u003c\/strong\u003e\u003cbr\u003eNo. This engraver is designed for non-ferrous metals: gold, silver, copper, and platinum. Steel and titanium are too hard for the diamond nib at manual pressure.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan it engrave set rings with stones?\u003c\/strong\u003e\u003cbr\u003eYes. The 360-degree rotating jaw accommodates narrow, wide, and set rings. Take care to avoid contact between the nib and any stones during engraving.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this tool require electricity?\u003c\/strong\u003e\u003cbr\u003eNo. This is a fully manual engraver. The jeweler guides the diamond nib pen by hand, giving complete control over depth and pressure with no power source needed.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow do I contact Tooltos if I have a question about my order?\u003c\/strong\u003e\u003cbr\u003eEmail the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Tooltos Inside Ring Engraver Machine (main unit)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e3 x Ring chucks (assorted sizes)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x User manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about compatible ring sizes, character plate options, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":47722648830251,"sku":"JHDKKZ012","price":349.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltos-character-letter-block-inside-ring-engraver-45671836877099.jpg?v=1715760887"},{"product_id":"5-ball-vise-jewelry-engraving-block-setting-tool","title":"Tooltos 5-Inch Ball Vise | 360-Degree Swivel Jewelry Engraving Stone Setting","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e360-Degree Swivel with Adjustable Resistance\u003c\/strong\u003e — Internal swivel brake adjusts from free-spinning to fully locked for precise workpiece positioning at any angle\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eDouble Ball Bearing System\u003c\/strong\u003e — Smooth, consistent rotation with no internal loosening or wear, maintaining precision under heavy daily use\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eSelf-Centering Jaw System\u003c\/strong\u003e — Automatically centers the workpiece for accurate stone setting and engraving without manual adjustment\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eAdjustable Jaw Distance\u003c\/strong\u003e — Accommodates a wide range of workpiece sizes up to 98mm jaw opening with support for various fixture attachments\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e10.2kg Solid Galvanized Steel Construction\u003c\/strong\u003e — Heavy-duty weight provides a stable, vibration-resistant base during engraving and setting work\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e5-Inch (130mm) Ball Diameter\u003c\/strong\u003e — Low-profile design suited for microscope-assisted engraving and standard jewelry bench setups\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e64mm Jaw Width, 38mm Jaw Height\u003c\/strong\u003e — Sized for rings, pendants, bracelets and other jewelry-scale workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Ball Vise\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe Tooltos 5-Inch Ball Vise is a professional jewelry workholding tool designed for jewelers, engravers and stone setters who need stable, rotatable control over their workpiece during precision work. The 360-degree swivel with adjustable internal brake lets you position the piece at any angle and lock it in place instantly. The double ball bearing system ensures smooth rotation that stays consistent over years of daily use. The self-centering jaw system holds rings, pendants and other jewelry pieces accurately without manual centering, and the 10.2kg galvanized steel base eliminates movement under tool pressure.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eHow It Compares\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eTooltos 5-Inch Ball Vise\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eStandard Bench Vise\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eEngraving Block (No Vise)\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eRotation\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e360-degree swivel, adjustable resistance\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eFixed or limited tilt\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e360-degree, no jaw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkholding\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eSelf-centering jaws, up to 98mm\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eFixed jaws\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePitch or wax only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMicroscope compatible\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eYes — low profile design\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNo\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eFixture attachments\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eYes — jaw system supports attachments\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eLimited\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eStability\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e10.2kg base — vibration resistant\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBench-mounted\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eLighter — less stable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eStone setting (bezel, pave, channel)\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHeavy industrial metalworking or machining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelry engraving by hand or machine\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkpieces exceeding 98mm jaw opening\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMicroscope-assisted engraving and setting\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eApplications requiring bench-mounted fixed vise\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eRings, pendants, and bracelet workholding\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNon-jewelry precision work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eSolid galvanized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBall Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e5 in \/ 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eJaw Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e64mm (2.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eJaw Height\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e38mm (1.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMax Jaw Opening\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e98mm (3.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eRotation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e360 degrees with adjustable resistance brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBearing System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eDouble ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e10.2kg (22.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eSet the swivel resistance to medium tension when engraving — this allows small repositioning adjustments without the vise spinning freely under tool pressure.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the included jaw plates to protect delicate workpiece surfaces from jaw marks during clamping.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eFor microscope work, position the vise so the ball center aligns with your microscope focal point — this minimizes refocusing when rotating the workpiece.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eApply a small amount of machine oil to the ball bearing mechanism periodically to maintain smooth rotation over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eWhen setting pave stones, lock the swivel fully between each stone to prevent the piece from shifting under hammer or graver pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan the rotational resistance be fully locked?\u003c\/strong\u003e\u003cbr\u003eYes. The internal swivel brake adjusts from completely free-spinning to fully locked, giving you complete control over workpiece positioning at any angle.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this suitable for microscope engraving work?\u003c\/strong\u003e\u003cbr\u003eYes. The low-profile design and 360-degree swivel make it well suited for microscope-assisted engraving and stone setting work.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the maximum jaw opening?\u003c\/strong\u003e\u003cbr\u003e98mm (3.9 in). Please confirm your workpiece size before ordering.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan additional fixtures be attached to the jaws?\u003c\/strong\u003e\u003cbr\u003eYes. The adjustable jaw system supports various fixture attachments for different workpiece shapes and sizes.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this suitable for beginner jewelers?\u003c\/strong\u003e\u003cbr\u003eThis vise is designed for professional-level precision work. It is suitable for experienced jewelers and engravers, as well as serious hobbyists who need reliable workholding for stone setting and engraving tasks.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eDoes the self-centering jaw work for odd-shaped pieces?\u003c\/strong\u003e\u003cbr\u003eThe self-centering system works best for symmetrical pieces such as rings and round pendants. For irregular shapes, use the fixture attachments to secure the piece manually.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Tooltos 5-inch ball vise (main unit)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Plastic accessory box\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e3 x Black ring accessories\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Hexagonal wrenches\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Upper jaw plates\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e6 x Screws\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about jaw compatibility, fixture attachments, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":48039073481003,"sku":"JHDKDKS02","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltos-5-ball-vise-jewelry-engraving-block-setting-tool-46285061456171.jpg?v=1721615559"},{"product_id":"3-ball-vise-jewelry-engraving-block-setting-tool","title":"Tooltos 3-Inch Ball Vise | 360-Degree Swivel Jewelry Engraving Stone Setting","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e360-Degree Swivel with Adjustable Resistance\u003c\/strong\u003e — Internal swivel brake adjusts from free-spinning to fully locked for precise workpiece positioning at any angle\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eDouble Ball Bearing System\u003c\/strong\u003e — Smooth, consistent rotation with no internal loosening or wear, maintaining precision under daily use\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eSelf-Centering Jaw System\u003c\/strong\u003e — Automatically centers the workpiece for accurate stone setting and engraving without manual adjustment\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003eCompact 3-Inch (78mm) Ball Diameter\u003c\/strong\u003e — Smaller footprint than the 5-inch model, suited for tighter bench setups and microscope work at close working distances\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e2.6kg Solid Galvanized Steel Construction\u003c\/strong\u003e — Lighter than the 5-inch model while still providing a stable, vibration-resistant base for precision work\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e\n\u003cstrong\u003e38mm Jaw Width, 47mm Max Opening\u003c\/strong\u003e — Sized for rings, small pendants, and other compact jewelry-scale workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Ball Vise\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos 3-Inch Ball Vise is a compact professional workholding tool for jewelers, engravers, and stone setters who need stable, rotatable control over small jewelry pieces during precision work. The 360-degree swivel with adjustable internal brake lets you position the piece at any angle and lock it in place instantly. The double ball bearing system ensures smooth rotation that stays consistent over years of daily use, and the self-centering jaw system holds rings, small pendants, and other compact pieces accurately without manual centering.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eAt 2.6kg and 78mm ball diameter, this model is significantly more compact than the 5-inch version. It takes up less bench space, positions closer to the microscope objective, and is easier to reposition during a work session. If you work primarily with smaller pieces and need a vise that fits a tighter workspace, this 3-inch model is the right choice. For larger workpieces up to 98mm jaw opening, or if you need the additional stability of a 10.2kg base, see the Tooltos 5-Inch Ball Vise.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eChoosing Between the Two Ball Vise Models\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eFeature\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003e3-Inch Model — This Model\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003e5-Inch Model\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBall diameter\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e3 in \/ 78mm\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e5 in \/ 130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMax jaw opening\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e47mm (1.9 in)\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e98mm (3.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e2.6kg (5.7 lb)\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e10.2kg (22.5 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBest for\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eCompact bench setups, smaller pieces, close microscope work\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eLarger pieces, maximum stability, wider jaw range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePrice\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e$149.99\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003e$199.99\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eStone setting (bezel, pave, channel) on rings and small pendants\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkpieces exceeding 47mm jaw opening — use the 5-inch model for larger pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelry engraving on compact pieces where bench space is limited\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHeavy industrial metalworking or machining requiring a fixed bench vise\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eMicroscope-assisted engraving and setting at close working distances\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWork requiring the additional base stability of the 10.2kg 5-inch model\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelers and engravers who need a lighter, more portable workholding solution\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNon-jewelry precision work outside the jewelry bench context\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eSolid galvanized steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBall Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e3 in \/ 78mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eJaw Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e38mm (1.5 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMax Jaw Opening\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e47mm (1.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eRotation\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e360 degrees with adjustable resistance brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBearing System\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eDouble ball bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2.6kg (5.7 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eSet the swivel resistance to medium tension when engraving — this allows small repositioning adjustments without the vise spinning freely under tool pressure.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the included jaw plates to protect delicate workpiece surfaces from jaw marks during clamping.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eFor microscope work, the compact 78mm ball diameter allows closer positioning to the objective lens than the 5-inch model — position the vise so the ball center aligns with your focal point to minimize refocusing when rotating.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eApply a small amount of machine oil to the ball bearing mechanism periodically to maintain smooth rotation over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eWhen setting pave stones, lock the swivel fully between each stone to prevent the piece from shifting under hammer or graver pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan the rotational resistance be fully locked?\u003c\/strong\u003e\u003cbr\u003eYes. The internal swivel brake adjusts from completely free-spinning to fully locked, giving you complete control over workpiece positioning at any angle.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the maximum jaw opening?\u003c\/strong\u003e\u003cbr\u003e47mm (1.9 in). This model is sized for rings, small pendants, and compact jewelry pieces. For workpieces up to 98mm, use the Tooltos 5-Inch Ball Vise.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this suitable for microscope engraving work?\u003c\/strong\u003e\u003cbr\u003eYes. The compact 78mm ball diameter and low-profile design make it well suited for microscope-assisted engraving and stone setting, particularly where a smaller vise fits better under the objective lens.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the difference between this and the 5-inch model?\u003c\/strong\u003e\u003cbr\u003eThe 3-inch model has a 78mm ball diameter, 47mm max jaw opening, and weighs 2.6kg — more compact and lighter, suited for smaller pieces and tighter bench setups. The 5-inch model has a 130mm ball diameter, 98mm max jaw opening, and weighs 10.2kg — more stable and suited for larger workpieces.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes the self-centering jaw work for odd-shaped pieces?\u003c\/strong\u003e\u003cbr\u003eThe self-centering system works best for symmetrical pieces such as rings and round pendants. For irregular shapes, use the fixture attachments to secure the piece manually.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the vise?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with jaw compatibility, fixture attachments, and setup questions.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Tooltos 3-inch ball vise (main unit)\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Plastic accessory box\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e3 x Black ring accessories\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Hexagonal wrenches\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Upper jaw plates\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e6 x Screws\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Service manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about jaw compatibility, fixture attachments, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":48039544914219,"sku":"JHDKDKS48","price":149.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltos-3-ball-vise-jewelry-engraving-block-setting-tool-46285159399723.jpg?v=1718963087"},{"product_id":"st60-binocular-stereo-jewelry-microscope","title":"Tooltos ST60 Binocular Stereo Microscope | 20X-40X, Jewelry","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eTwo fixed magnification steps — 20X and 40X — with locked-in eyepieces for sharp, stable images without zoom drift\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e100mm working distance keeps your hands and tools clear of the objective lens during soldering, engraving, and setting work\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e45-degree tilted binocular head with 360-degree rotation and 54-76mm pupil distance adjustment for comfortable long-session viewing\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eWide-field WF10X\/20 eyepieces with diopter adjustment on each tube to compensate for individual vision differences\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eFull optical glass elements and rugged metal frame built for daily professional use on the jeweler's bench\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eCompact footprint — 200 x 255 x 315mm (7.9 x 10.0 x 12.4 in) — fits on a standard bench without dominating the workspace\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Microscope\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos ST60 is a fixed-magnification binocular stereo microscope designed for jewelers, engravers, watchmakers, and mold makers who need reliable, fatigue-free magnification for precision bench work. Unlike zoom microscopes, the ST60 uses a 2X\/4X objective with WF10X eyepieces to deliver two discrete, sharp magnification steps: 20X for general work and 40X for fine detail inspection.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe fixed-magnification design means the optical path is optimized for each step — there is no zoom mechanism to introduce image softness or drift. The 45-degree binocular head reduces neck strain during extended sessions, and the locked-in eyepiece design prevents accidental rotation during use. If you need continuous zoom magnification from 7X to 45X with a spring-counterbalanced stand, see the Tooltos Binocular Stereo Microscope with Spring Stand.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelers who work primarily at one or two consistent magnification levels and prefer a stable, drift-free image\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eUsers who need continuous zoom — this microscope offers 20X and 40X only. For 7X-45X zoom, see the Tooltos Spring Stand Stereo Microscope\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBench jewelers doing soldering, engraving, stone setting, and restoration work at a fixed station\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWork requiring more than 100mm (3.9 in) of clearance below the lens — for larger fixtures, the spring stand model offers 160mm working distance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWatchmakers and mold makers needing a compact, reliable microscope for detail inspection\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDigital or camera output — this is a purely optical microscope with no screen, HDMI, or USB connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkshops with limited bench space that need a capable microscope with a smaller footprint\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePortable or field use — this is a bench-mounted instrument designed for fixed workshop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eEyepieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eWF10X\/20 wide-field (locked-in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eObjective Lens\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2X \/ 4X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMagnification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e20X and 40X (fixed steps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWorking Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e100mm (3.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eFocusing Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e50mm (2.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eViewing Head\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e45-degree tilt, 360-degree rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePupil Distance Adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e54 - 76mm (2.1 - 3.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eBilateral Visual Adjustment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e+\/-5 diopter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e200 x 255 x 315mm (7.9 x 10.0 x 12.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e4.0kg (8.8 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eLens Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eFull optical glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eFrame Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis microscope provides 20X and 40X fixed magnification only. It does not have a zoom mechanism. If you need continuous zoom from 7X to 45X, please see the Tooltos Binocular Stereo Microscope with Spring Stand.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eAdjust the pupil distance first before focusing — set it so both eyepiece images merge into a single circle, then fine-tune focus for a sharp, comfortable view.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the diopter ring on each eyepiece to compensate for any difference in vision between your left and right eye before starting a session.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003ePosition your bench light at an angle to the workpiece rather than directly below — angled lighting creates shadows that reveal surface texture and depth more clearly under magnification.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse 20X for general layout, orientation, and soldering work, then switch to 40X for fine prong inspection, engraving detail, and quality checking.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eClean the eyepiece lenses with a dedicated lens cloth only — avoid paper towels and fabric that can scratch optical glass coatings over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this microscope have zoom capability?\u003c\/strong\u003e\u003cbr\u003eNo. The ST60 provides two fixed magnification steps: 20X and 40X. There is no zoom mechanism. If you need continuous zoom from 7X to 45X, please see the Tooltos Binocular Stereo Microscope with Spring Stand.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the working distance?\u003c\/strong\u003e\u003cbr\u003eThe working distance is 100mm (3.9 in) — the space between the bottom of the objective lens and your workpiece surface. This is sufficient for most ring clamps and small engraving blocks. For larger fixtures requiring more clearance, the spring stand model offers 160mm working distance.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this microscope have a camera or screen output?\u003c\/strong\u003e\u003cbr\u003eNo. The ST60 is a purely optical binocular microscope with no built-in camera, HDMI output, or USB connection. A compatible camera adapter can be added separately if image capture is needed.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the difference between this and the Tooltos Spring Stand Stereo Microscope?\u003c\/strong\u003e\u003cbr\u003eThe ST60 offers fixed 20X and 40X magnification with a compact, lighter stand (4.0kg \/ 8.8 lb). The Spring Stand model offers continuous 7X-45X zoom, a 160mm working distance, and a spring-counterbalanced arm for height adjustment. Choose the ST60 for simplicity and compactness; choose the Spring Stand model for flexibility and larger working clearance.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan I use this microscope for watchmaking and electronics repair?\u003c\/strong\u003e\u003cbr\u003eYes. The ST60 is suitable for watchmaking, electronics assembly, mold inspection, and any precision work that benefits from stable 20X or 40X magnification. The rugged metal frame and locked-in eyepieces make it reliable for daily professional use.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the microscope?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, optical adjustment, and accessory compatibility.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x ST60 binocular stereo microscope\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x WF10X\/20 wide-field eyepieces\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Elastic eye protection circles\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Objective lens protector\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about optical setup, magnification selection, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":49648746103083,"sku":"JHDKDKS25","price":269.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltos-st60-jewelry-binocular-stereo-microscope-47763146899755.jpg?v=1728557066"},{"product_id":"jewelry-binocular-stereo-microscope-with-spring-stand-miniature-inlay-microscope","title":"Tooltos Binocular Stereo Microscope | 7X-45X, Spring Stand","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e7X-45X continuous zoom gives you the right magnification for every task — from broad layout work to fine prong setting and detail inspection\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e160mm working distance keeps your hands and tools fully clear of the lens while working under magnification\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eSpring-counterbalanced stand holds the microscope head at any height without drift — no re-locking required between adjustments\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e45-degree tilted binocular head with 360-degree rotation lets you position the eyepieces for comfortable viewing at any bench angle\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eWF10X\/20 wide-field eyepieces with adjustable pupil distance (55-75mm) accommodate a wide range of users without eyestrain\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eOptical glass lenses and metal frame construction built for daily professional use on the jeweler's bench\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Microscope\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos Binocular Stereo Microscope is designed for jewelers, stone setters, and precision craftspeople who need reliable, comfortable magnification for daily bench work. The 7X-45X continuous zoom range covers the full spectrum of jewelry tasks: use lower magnification for layout and orientation, then zoom in for prong setting, engraving detail, or weld inspection without changing eyepieces or objectives.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe spring stand is a practical advantage over fixed-arm designs. It counterbalances the microscope head so you can reposition it smoothly and it stays exactly where you leave it. The 160mm working distance is generous enough to accommodate ring clamps, engraving blocks, and other bench fixtures under the lens without obstruction. The 45-degree binocular head reduces neck strain during extended sessions compared to upright viewing configurations.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eProfessional jewelers doing stone setting, prong work, and detail engraving\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDigital or camera output — this is a purely optical microscope with no screen, HDMI, or USB output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBench jewelers who need hands-free magnification with full tool clearance below the lens\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWorkspaces with limited bench depth — the stand extends to 900mm and the full unit weighs 8.7kg (19.2 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eWatch repair technicians and electronics assemblers needing stable, vibration-free magnification\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHigh-magnification specimen inspection above 45X — for higher magnification, a compound microscope is required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelry schools and training workshops requiring a durable, adjustable teaching microscope\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePortable or field use — this is a bench-mounted instrument designed for fixed workshop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eEyepieces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eWF10X\/20 wide-field\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eObjective Lens\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0.5X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMagnification Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e7X - 45X (continuous zoom)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eContinuous Zoom Ratio\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0.7X - 4.5X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWorking Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e160mm (6.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eField of View\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e5.1 - 33mm (0.2 - 1.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePupil Distance\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e55 - 75mm (2.2 - 3.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eViewing Head\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e45-degree tilt, 360-degree rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eLens Circle Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e75mm (3.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eStand Extension Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e900mm (35.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eOverall Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e930 x 180 x 505mm (36.6 x 7.1 x 19.9 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e8.7kg (19.2 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eLens Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eOptical glass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eFrame Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eMetal with spring-counterbalanced stand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eBlack and Silver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis is a purely optical stereo microscope. It does not include a camera, screen, or digital output. If you require image capture or display output, a digital microscope camera adapter is needed and sold separately.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eSet your interpupillary distance first before adjusting magnification — a correctly set pupil distance gives you a single, merged image and reduces eye fatigue significantly.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the diopter adjustment on each eyepiece to compensate for any difference in vision between your left and right eye before starting work.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003ePosition your bench light source at an angle rather than directly below the workpiece — angled lighting creates shadows that reveal surface texture and depth more clearly under magnification.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eClean the eyepiece lenses with a lens cloth only — paper towels and fabric can scratch optical glass coatings and degrade image clarity over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eWhen not in use, cover the eyepieces with the dust caps to prevent dust accumulation on the internal optics, which is difficult to clean without disassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eDoes this microscope have a camera or screen output?\u003c\/strong\u003e\u003cbr\u003eNo. This is a purely optical binocular microscope. It has no built-in camera, HDMI output, or USB connection. If you need to capture or display images, a compatible camera adapter can be added separately.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat is the working distance and why does it matter for jewelry work?\u003c\/strong\u003e\u003cbr\u003eThe working distance is 160mm (6.3 in) — the space between the bottom of the objective lens and the surface of your workpiece. This is generous enough to accommodate ring clamps, engraving blocks, and most bench fixtures without obstruction while working under magnification.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan I use this microscope for both stone setting and engraving?\u003c\/strong\u003e\u003cbr\u003eYes. The 7X-45X zoom range covers both applications. Use lower magnification (7X-15X) for general orientation and layout, and higher magnification (25X-45X) for fine prong work, engraving detail, and weld inspection.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow much bench space does this microscope require?\u003c\/strong\u003e\u003cbr\u003eThe stand extends to 900mm (35.4 in) in height and the base requires a stable flat surface. The full unit weighs 8.7kg (19.2 lb). Plan for a dedicated area on your bench where the stand can be bolted or weighted securely.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs the spring stand adjustable for different working heights?\u003c\/strong\u003e\u003cbr\u003eYes. The spring-counterbalanced stand allows smooth height adjustment and holds the microscope head at any position without drifting. You do not need to re-lock it after each adjustment.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the microscope?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, optical adjustment, and accessory compatibility questions.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Binocular stereo microscope with spring stand\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x WF10X\/20 wide-field eyepieces\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 0.5X objective lens\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Elastic eye protection circles\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Plum-shaped adjustment knobs\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Hexagonal wrench\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Allen key\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e4 x Chassis screws and screw gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about optical setup, accessory compatibility, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":49690950402347,"sku":"JHDKDKS41","price":419.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltos-jewelry-binocular-stereo-microscope-with-spring-stand-miniature-inlay-microscope-47751830470955.jpg?v=1728470850"},{"product_id":"204-dental-jewelry-nail-care-grinding-and-engraving-machines","title":"Tooltos 204 Micro Motor Engraver | 35000RPM, Foot Pedal","description":"\u003cdiv style=\"font-family:inherit; color:inherit;\"\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eKey Selling Points\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem; font-size:16px; line-height:1.8;\"\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e35000RPM variable speed motor delivers smooth, consistent power for engraving, grinding, and polishing across different materials\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eDual speed control modes — switch freely between the front knob and foot pedal without stopping work\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e102L handpiece features high-concentricity bearings for stable, vibration-free operation with minimal noise\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e65W high-efficiency motor with built-in exhaust cooling port maintains stable performance during extended sessions\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003e2.35mm chuck accepts standard jewelry and dental burs, carbide bits, and grinding accessories\u003c\/li\u003e\n\u003cli style=\"margin-bottom:0.5rem;\"\u003eComplete kit includes handpiece, foot pedal, bracket, and backup carbon brushes — ready to use out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eAbout This Engraving Machine\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eThe Tooltos 204 Micro Motor Engraver is a compact, high-speed rotary tool designed for precision work across jewelry making, dental lab applications, jade carving, and nail care. With a top speed of 35000RPM and infinitely variable speed control, it gives you precise command over material removal rate — from delicate surface engraving to more aggressive grinding and shaping.\u003c\/p\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eThe dual control system is a practical advantage: use the front knob for preset speed work, or switch to the foot pedal when you need hands-free speed adjustment. The 102L handpiece is built with high-concentricity bearings that keep the bit running true at high RPM, reducing hand fatigue and improving line quality. Carbon brushes are user-replaceable, extending the working life of the machine without requiring professional servicing.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eApplication Guide\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eTypical Use\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJewelry Making\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eEngraving, surface finishing, prong shaping, and detail carving on gold, silver, and brass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDental Lab\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePolishing and trimming dental models and prosthetics with standard 2.35mm dental burs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJade and Stone Carving\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eGrinding and shaping jade, semi-precious stones, and similar materials at controlled speeds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNail Care\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eProfessional nail filing, shaping, and cuticle work with compatible nail bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eBest For \/ Not For\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color:#f5f5f5;\"\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eBest For\u003c\/th\u003e\n\u003cth style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; font-weight:600; text-align:left;\"\u003eNot For\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBench jewelers needing a versatile rotary tool for daily engraving and finishing work\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eBits with shanks larger than 2.35mm — the chuck does not accept 3mm or larger shanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eDental lab technicians using standard 2.35mm burs for model trimming and polishing\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eHeavy-duty industrial grinding or cutting of hardened steel and industrial alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eJade carvers and stone artists who need variable speed control for different hardness levels\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003ePneumatic engraving — this is an electric micro motor, not a pneumatic tool. For pneumatic engraving, see the Tooltos GraverMate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eNail technicians requiring a quiet, low-vibration tool for professional nail care\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; line-height:1.6;\"\u003eUsers who need a compressor-free pneumatic setup — this machine runs on standard AC power only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width:100%; border-collapse:collapse; margin-bottom:1.5rem; font-size:15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e65W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eSpeed Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e0 - 35,000 RPM (infinitely variable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eTorque\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2.8 N.cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eChuck Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2.35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eSpeed Control\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eFront knob and foot pedal (switchable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eVoltage Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e110V \/ 220V (select at checkout)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eHousing Material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Dimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e100 x 155 x 85 mm (3.9 x 6.1 x 3.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color:#f9f9f9;\"\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0; width:40%;\"\u003e\u003cstrong\u003eMachine Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding:0.6rem 0.9rem; border:1px solid #e0e0e0;\"\u003e2.1 kg (4.6 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\n\u003cdiv style=\"background-color:#fff3cd; border-left:4px solid #e6a817; padding:12px 16px; margin:16px 0; line-height:1.7;\"\u003e\nThis machine accepts 2.35mm shank bits only. Bits with 3mm or larger shanks are not compatible. Please verify your accessory shank size before ordering.\n\u003c\/div\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003ePro Tips\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eStart at a low speed setting when working on new materials — increase RPM gradually until you find the right balance between speed and control for that specific metal or stone.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the foot pedal when doing freehand engraving — it lets you modulate speed in real time without lifting your hands from the workpiece.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eReplace carbon brushes when you notice a drop in torque or inconsistent speed — two backup brushes are included in the kit for this purpose.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eKeep the handpiece chuck clean and free of metal dust — debris in the chuck can cause bit runout and reduce engraving precision over time.\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003eUse the handpiece bracket when the machine is not in use to protect the handpiece tip and prevent accidental bit damage on the bench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhat shank size do the bits need to be?\u003c\/strong\u003e\u003cbr\u003eThis machine uses a 2.35mm chuck. All bits, burs, and grinding accessories must have a 2.35mm shank. Bits with 3mm or larger shanks are not compatible and will not fit.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eWhich voltage should I order — 110V or 220V?\u003c\/strong\u003e\u003cbr\u003eSelect the voltage that matches your local power supply. North America and most of the Americas use 110V. Europe, Asia, Australia, and most other regions use 220V. Check your workshop outlet if you are unsure.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eCan I use both the knob and foot pedal at the same time?\u003c\/strong\u003e\u003cbr\u003eThe two speed control modes are switchable, not simultaneous. You select either the front knob or the foot pedal as your active control. Both give you full 0-35000RPM range.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eIs this machine suitable for engraving hardened steel?\u003c\/strong\u003e\u003cbr\u003eNo. The 204 is designed for jewelry metals (gold, silver, brass, copper), dental materials, jade, and similar materials. It is not rated for hardened steel or industrial-grade alloys.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e\u003cstrong\u003eHow do I know when to replace the carbon brushes?\u003c\/strong\u003e\u003cbr\u003eReplace the brushes when you notice reduced torque, inconsistent speed, or increased sparking from the motor. Two backup brushes are included. Replacement is straightforward and does not require professional servicing.\u003c\/p\u003e\n\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003e\u003cstrong\u003eWhat if I have questions after receiving the machine?\u003c\/strong\u003e\u003cbr\u003eContact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days and can assist with setup, accessory compatibility, and troubleshooting.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left:1.5rem; margin-bottom:1.5rem;\"\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 204 micro motor engraving machine\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x 102L handpiece\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Foot pedal speed control\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Handpiece bracket\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Maintenance wrench\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e2 x Backup carbon brushes\u003c\/li\u003e\n\u003cli style=\"font-size:16px; line-height:1.8; margin-bottom:0.5rem;\"\u003e1 x Power cable (voltage-matched to selected variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size:20px; font-weight:600; margin-top:2rem; margin-bottom:0.75rem; line-height:1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size:16px; line-height:1.8; margin-bottom:1.25rem;\"\u003eQuestions about bit compatibility, speed settings, or order status? Contact the Tooltos team at sales@tooltos.com. We respond within 24 hours on business days.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"110V","offer_id":51677176725803,"sku":"JHDMDMJ30","price":109.99,"currency_code":"USD","in_stock":true},{"title":"220V","offer_id":51677176758571,"sku":"JHDMDMJ14","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tool-tooltos-204-dental-jewelry-nail-care-grinding-and-engraving-machines-47964595224875.jpg?v=1730283085"},{"product_id":"multi-angle-engraving-knife-grinding-machine-hh-gm01","title":"Tooltos Multi-Angle Engraving Knife Grinding Machine HH-GM01","description":"\u003cdiv style=\"font-family: inherit; color: inherit;\"\u003e\n\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.25rem;\"\u003eThe Tooltos HH-GM01 Multi-Angle Engraving Knife Grinding Machine provides precise, repeatable sharpening for HSS and carbide engraving tools across a full range of angles. Three diamond grinding wheels (260, 600, and 1200 grit), a QC template fixture with adjustable elevation, and a degree ring for angle selection give engravers and jewelers complete control over tool geometry — from rough shaping to final polishing.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eKey Features\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eMulti-Angle Sharpening System\u003c\/strong\u003e — QC template fixture with adjustable elevation and degree ring supports 90°, 105°, 120°, and any custom angle. Stainless steel fixing holes with knob rotation securely hold the engraving knife during grinding.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eThree Diamond Grinding Wheels\u003c\/strong\u003e — 260, 600, and 1200 grit wheels included for rough grinding, intermediate sharpening, and fine polishing in one machine.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eVariable Speed Control\u003c\/strong\u003e — Rotary speed knob adjusts from 400 to 900 RPM. Forward and reverse rotation switch for flexible grinding direction.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eAnti-Static High-Temperature Stainless Steel Body\u003c\/strong\u003e — Superb hardness and corrosion resistance with anti-static design for safe operation.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eCompact Stainless Steel Base\u003c\/strong\u003e — Stable footprint with easy storage. Machine size 510 × 510 × 510 mm.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eUniversal Voltage\u003c\/strong\u003e — 110V–220V compatible with voltage converter plug included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e110V – 220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e50 \/ 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e150W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eSpeed Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e400 – 900 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eDiamond Wheel Grit Options\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e260 \/ 600 \/ 1200 grit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eSupported Angles\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e90°, 105°, 120°, and any custom angle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003eMachine Size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e510 × 510 × 510 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e\u003cstrong\u003ePacking Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6; vertical-align: top;\"\u003e12.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eGrinding Wheel Reference\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\n\u003cthead\u003e\n\u003ctr style=\"background-color: #f5f5f5;\"\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eGrit\u003c\/th\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; font-weight: 600; text-align: left;\"\u003eUse\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003e260 Grit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eRough grinding — reshaping damaged or dull tool edges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003e600 Grit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eIntermediate sharpening — refining the edge geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003e\u003cstrong\u003e1200 Grit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; line-height: 1.6;\"\u003eFine polishing — final edge finishing for engraving-ready sharpness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eCompatible Tools\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.25rem;\"\u003eHSS (high-speed steel) and carbide engraving tools, polygonal tools, semi-circular tools, and reverse taper shaped tools used in jewelry engraving, stone setting, and precision metalwork.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eCan this machine grind carbide tools?\u003c\/strong\u003e\u003cbr\u003eYes. The diamond grinding wheels are suitable for both HSS and carbide engraving tools.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eWhat angles can be set on this machine?\u003c\/strong\u003e\u003cbr\u003eThe degree ring supports 90°, 105°, and 120° preset angles, as well as any custom angle using the adjustable elevation fixture.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eDoes the machine support both forward and reverse rotation?\u003c\/strong\u003e\u003cbr\u003eYes. A forward\/reverse switch allows easy adjustment of grinding direction for different tool geometries.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eIs a voltage converter included?\u003c\/strong\u003e\u003cbr\u003eYes. A voltage converter plug and AC\/DC adapter are included in the package.\u003c\/p\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.25rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × HH-GM01 Engraving Knife Grinding Machine\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Carving Knife Fixture\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Angle Circle and Bracket\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Grinding Disc and Bracket\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Voltage Converter Plug\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × AC\/DC Adapter\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Accessory Toolkit\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 × Power Cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem; line-height: 1.4;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.5rem;\"\u003eFor technical questions or assistance, contact the Tooltos support team at \u003cstrong\u003esales@tooltos.com\u003c\/strong\u003e or via live chat at www.tooltos.com. Responses are typically provided within 2 hours.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"Default Title","offer_id":50057154756907,"sku":"JHDKDKS14","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-tooltosmulti-angle-engraving-knife-grinding-machine-hh-gm01-48579944349995.jpg?v=1734773191"},{"product_id":"tooltos-gold-and-silver-jewelry-cutting-machine-220v","title":"Tooltos Precision Jewelry Cutting Engraving Machine 220V High Accuracy","description":"\u003cdiv style=\"font-family: inherit; color: inherit;\"\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.25rem;\"\u003eThe Tooltos Precision Jewelry Cutting Engraving Machine delivers ±0.02mm cutting accuracy for gold, silver, platinum, palladium, and alloys. With variable speed from 950 to 5,200 RPM and a 60W motor, it handles both delicate soft metals and harder alloys. The adjustable work platform accommodates jewelry of different sizes. Operates on 220V 50Hz.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eKey Features\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.5rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003e±0.02mm Cutting Precision\u003c\/strong\u003e — High-accuracy cutting for intricate jewelry designs, bezel preparation, and precise sizing adjustments.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eVariable Speed 950–5,200 RPM\u003c\/strong\u003e — Adjustable speed for different metals and cutting depths. Lower speeds for soft metals, higher RPM for harder alloys.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003e60W Motor\u003c\/strong\u003e — Consistent power output for sustained cutting operations.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eBurr-Free Cuts\u003c\/strong\u003e — Reduces secondary finishing work on cut edges.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eAdjustable Work Platform\u003c\/strong\u003e — Accommodates jewelry from small rings to large pendants.\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\n\u003cstrong\u003eReplaceable Cutting Blades\u003c\/strong\u003e — Consumable blades can be replaced as needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eTypical Applications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\n\u003cthead\u003e\u003ctr style=\"background-color: #f5f5f5;\"\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; text-align: left;\"\u003eApplication\u003c\/th\u003e\n\u003cth style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0; text-align: left;\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eJewelry Manufacturing\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003ePrecision cutting for production, complex design reproduction, custom piece creation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eCustom Jewelry Design\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eIntricate pattern cutting, one-of-a-kind pieces, personalized engraving preparation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eJewelry Repair\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003ePrecise sizing adjustments, damaged piece restoration, component replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eGemstone Setting Preparation\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eBezel cutting, prong preparation, channel setting work\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse; margin-bottom: 1.5rem; font-size: 15px;\"\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eSKU\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eJHHXJL073\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eCutting Precision\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e±0.02mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eSpeed Range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e950 – 5,200 RPM (variable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eMotor Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eVoltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e220V 50Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eCompatible Materials\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003eGold, Silver, Platinum, Palladium, Alloys\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e5.12 x 5.79 x 4.92 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background-color: #f9f9f9;\"\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"padding: 0.6rem 0.9rem; border: 1px solid #e0e0e0;\"\u003e10 kg (22 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eCan it cut hard metals like platinum?\u003c\/strong\u003e\u003cbr\u003eYes. Variable speed up to 5,200 RPM handles soft gold through hard platinum alloys.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eWhat voltage does it require?\u003c\/strong\u003e\u003cbr\u003eThis model operates on 220V 50Hz. Contact sales@tooltos.com for 110V availability.\u003c\/p\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e\u003cstrong\u003eAre cutting blades replaceable?\u003c\/strong\u003e\u003cbr\u003eYes. Cutting blades are consumable and can be replaced as needed.\u003c\/p\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eWhat's Included\u003c\/h2\u003e\n\u003cul style=\"padding-left: 1.5rem; margin-bottom: 1.25rem;\"\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 x Tooltos Jewelry Cutting Engraving Machine (220V)\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 x Power Cable (220V)\u003c\/li\u003e\n\u003cli style=\"font-size: 16px; line-height: 1.8; margin-bottom: 0.5rem;\"\u003e1 x User Manual (English)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"font-size: 20px; font-weight: 600; margin-top: 2rem; margin-bottom: 0.75rem;\"\u003eSupport\u003c\/h2\u003e\n\u003cp style=\"font-size: 16px; line-height: 1.8; margin-bottom: 1.5rem;\"\u003eFor technical questions or assistance, contact the Tooltos support team at \u003cstrong\u003esales@tooltos.com\u003c\/strong\u003e or via live chat at www.tooltos.com. Responses are typically provided within 2 hours.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Tooltos","offers":[{"title":"220V","offer_id":51228404220203,"sku":"JHHXJL073","price":259.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0806\/2140\/4459\/files\/tooltos-jewelry-tools-220v-tooltos-gold-and-silver-jewelry-cutting-machine-220v-1190999698.png?v=1763015514"}],"url":"https:\/\/www.tooltos.com\/collections\/jewelry-engraving-and-stone-setting-tools.oembed","provider":"Tooltos Jewelry Tools","version":"1.0","type":"link"}